
This L298N Motor Driver Module is a high power motor driver module for driving DC and Stepper Motors. This module consists of an L298 motor driver IC and a 78M05 5V regulator. L298N Module can control up to 4 DC motors, or 2 DC motors with directional and speed control.

IN1 & IN2: Motor A input pins. Used to control the spinning direction of Motor A
IN3 & IN4: Motor B input pins. Used to control the spinning direction of Motor B
ENA: Enables PWM signal for Motor A. Here it has been connected to 5V with a jumper cap.
ENB: Enables PWM signal for Motor B. Here it has been connected to 5V with a jumper cap.
OUT1 & OUT2: Output pins of Motor A
OUT3 & OUT4: Output pins of Motor B
12V: 12V input from DC power Source
5V: Supplies power for the switching logic circuitry inside L298N IC
GND: Ground pin
Operating Principle
The driver module can drive two motors. The enabled terminals ENA and ENB are effective at high level.
The working relationship between ENA and IN1,IN2 is as follows:
|
ENA |
IN1 |
IN2 |
The state of Motor A |
|---|---|---|---|
|
0 |
X |
X |
Stop |
|
1 |
0 |
0 |
Brake |
|
1 |
0 |
1 |
Rotate clockwise |
|
1 |
1 |
0 |
Rotate counterclockwise |
|
1 |
1 |
1 |
Brake |
The working relationship between ENB and IN3,IN4 is as follows.
|
ENB |
IN3 |
IN4 |
The state of Motor B |
|---|---|---|---|
|
0 |
X |
X |
Stop |
|
1 |
0 |
0 |
Brake |
|
1 |
0 |
1 |
Rotate clockwise |
|
1 |
1 |
0 |
Rotate counterclockwise |
|
1 |
1 |
1 |
Brake |
About 5V Enable Cap
The L298N Motor Driver module consists of an L298 Motor Driver IC, 78M05 Voltage Regulator, resistors, capacitor, Power LED, 5V jumper in an integrated circuit.
78M05 Voltage regulator will be enabled only when the jumper is placed. When the power supply is less than or equal to 12V, then the internal circuitry will be powered by the voltage regulator and the 5V pin can be used as an output pin to power the microcontroller.
The jumper should not be placed when the power supply is greater than 12V and separate 5V should be given through 5V terminal to power the internal circuitry.
Shipping | Delivery Period | For in-stock parts, orders are estimated to ship out in 3 days. Elecbee ships orders once a day at about 5pm except Sunday. Once shipped, estimated delivery time depends on the below carriers you chose. DHL Express: 3-7 business days DHLeCommerce: 12-22 business days FedEx International Priority: 3-7 business days EMS: 10-15 business days Registered Air Mail: 15-30 business days | |
| Shipping Rates | Shipping rates for your order can be found in the shopping cart. | ||
| Shipping Options | Shipping rates for your order can be found in the shopping cart. | ||
| Shipping Tracking | We will notify you by email with tracking number once order is shipped. You can track your order using the “Track My Order” feature. | ||
| Returning/Warranty | Returning | Returns are normally accepted when completed within 30 days from date of shipment, please contact customer service for a return authorization. Parts should be unused and in original packaging. Customer has to take charge for the shipping | |
| Warranty | All Elecbee purchases come with a 30-day money-back return policy, plus 1-year Elecbee warranty against any manufacturing defects. | ||
| This warranty shall not apply to any item where defects have been caused by improper customer assembly failure by customer to follow instructions, product modification, negligent or improper operation | |||
| Ordering | How to Buy | Elecbee accepts online orders. | |
| Add to cart > Check out > Submit order > Complete payment > Delivery | |||
| Payment | PayPal, Credit Card includes Visa, Master, American Express, Bank transfer. | ||