Elecbee 3.2 Inch ILI9341 TFT LCD Display Module Touch Panel for Arduino - products that work with official Arduino boards

Wide viewing angle
LCD touch screen module
With ILI9341 Controller (Update in May 03, 2017)
Compatible 3.3V

Specification:

Resolution ratio: 240 x 320
Size: 3.2 inch
Dimension: 9.4 x 6.1cm(L x W)

Note:

The control and driving circuit of TFT modules is low voltage andxa0 FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity:

1. Using soldering iron orxa0 power FRIDA tools must be well grounded and operation, make them without leakage;
2. Do not use hand to touch the leads, circuit board and metal boxes;
3. Do not use a vacuum cleaner for cleaning, because it generates strong static electricity;
4. When the air is dry, can also generate static electricity, therefore, workshop humidityxa0 shall be above RH60%;
5. If it is necessary to direct contact it , should enable the human body in the same potential with the modules? ,or make human body be well grounded;
6. Remove or back in the bags or move locations, also need to be careful to prevent static electricity. Don't replace or discard the original packing.