Elecbee DC 5V 12V 24V 10A Adjustable Time Delay Relay Module LED Digital Timming Relay Multifunction Timer Delay Switch Timer Control

SKU: EB0046428

Favorites

Key Features

- It has 24 common functions to meet more application requirements
- It Can control the solenoid valve, water pump, motor, light belt and so on.
- Low power consumption, superior performance.
- The product has a wide range of applications and can be used in many fields.

Specification:

Model: YYC-2S
Material: Plastic
Weight: 51g/1.8oz
Voltage: 5V, 12V, 24V (Optional)
Output power: DC or AC load within 5A can be controlled
Time range: 0.01 seconds to 999 minutes can be adjusted at any time
Description of wiring port:
1. DC+ : input the positive pole of DC power supply
2, DC- : input DC power supply cathode
3. IN+ : signal input is positive
4, IN- : signal input terminal negative
5. NO: the relay normally opens the interface, and the relay is suspended before absorption, and is connected with COM short after absorption
6. COM: relay public interface
7. NC: the relay normally closes the interface, and the relay is short connected with COM before absorbing and suspended after absorbing.

Setting Instructions:

Power on display "-------" means to enter standby state;
Press K1 for the first time (it takes more than 1 second to be effective to prevent false triggering), and it shows: p-11: K2 adjusts the main mode, K3K4 adjusts the function
Press K1 the second time, the screen will show: a001:k2 and K3 to adjust the first time A and K4 to adjust the decimal point (time unit).
Press K1 for the third time, and the screen will show: b001:k2 and K3 to adjust the second time B and K4 to adjust the decimal point (time unit).
Press K1 for the fourth time, and "--" indicates standby state
Press K4 in standby state to permanently close/open the display and switch to low-power mode.

Description of decimal point time unit:

X.XX decimal point in place, timing range: 0.01 seconds to 9.99 seconds
XX.X decimal point in the tens place, timing range: 0.1 seconds to 99.9 seconds
XXX has no decimal point, timing range: 1 second ~999 seconds
XXX. Decimal point in the ones place, timing range: 1 minute to 999 minutes.

Show Less

Specifications

Show Similar Products >

Attribute

Value

Wireless Capability

Bluetooth

Show Similar Products >

Description

Function:

P-11: Point (give the signal relay to close, signal loss relay to disconnect).

P-12: Self-locking (give the second signal relay to close, and then give a signal loss relay to disconnect).

P-13: To give the signal, the relay stops automatically at the time of drawing A, and the trigger is invalid during the delay period.

P-14: To give the signal, the relay draws A time to stop automatically, triggering a re-timing during the delay.

P-15: To give the signal, the relay draws A time to stop automatically, triggering the stacking timing during the delay.

P-16: To give the signal, the relay automatically stops when it draws on A, triggering a reset during the delay.

P-17: Give the signal, the relay draws, after the input signal is disconnected, start timing A time is disconnected, during the delay period, give the signal again to maintain the output, the timing stops.

P-18: After power-on, the relay immediately draws, and after A delay, it is disconnected until the next power-on.

P-21: Give the signal, delay A time, the relay draws.

P-22: Give continuous signal, after more than A time, the relay draws, the signal disappears, the relay is disconnected.

P-23: After the signal disappears for more than A time, the relay draws, there is a signal, the relay is disconnected.

P-24: There is A signal, after the time exceeds A, the relay draws, the signal disappears after the time exceeds A, the relay disconnects.

P-25: There is A signal, after more than A time, the relay draws, again after the signal exceeds A time, the relay disconnects.

P-26: There is A signal, the relay stops after closing A time, the signal disappears and the relay stops after closing A time again.

P-27: Detect pulse signal, relay does not work, no pulse signal, relay delay A time pull in.

P-28: Delay A time after power-on, relay draws until power off.

P-31: After the power is switched on, the relay absorbs A time, disconnects B time, and cycles indefinitely until the power is off.

P-32: There is a signal, start P-31 infinite cycle, signal disappears, terminate the cycle.

P-33: Give a signal, start P31 infinite cycle, give a signal to terminate the cycle.

P-34: After the power is powered on, after the delay time A, the relay is drawn, and the suction time B is disconnected.

P-35: There is A signal, after the delay time A, the relay pulls in, and the pull in time B is disconnected.

P-36: There is A signal, after the delay time A, the relay is disconnected at B time, the signal disappears, and the timing is cleared and stopped.

P-37: If there is A signal, the relay will automatically stop when it draws A time, and then time B time after stopping. The signal trigger is invalid during A+B time.

P-38: If there is A signal, the relay will automatically stop when it draws time A, and then time time B after stopping, and then stop when it draws time A again.

P-41: There is no signal action, the signal disappears and triggers, and the output is disconnected after A time.

P-42: The signal disappears, the output starts after A time delay, and the work ends after B time.

P-43: Signal disappears, output starts after A time, and ends after working time.

P-44: After power-on, output start time A, stop time B, cycle C ends.

P-45: Power on does not act, give the signal output start A time, stop on :B time, cycle C disconnect. Give the signal again. Do it again.

P-46: After giving the signal for more than A times, the relay output starts and maintains the output.

P-47: After giving the signal for more than A times, the output starts at B time and stops.

P-48: After giving the signal for more than A times in C seconds, the output starts and stops for B seconds.

Note:

1. Due to the light and screen difference, the item's color may be slightly different from the pictures.

2. Please allow 1-3cm differences due to manual measurement.

Package Included:

1x Time Delay Relay

5V--12V--24V-LED-Display-Adjustable-Timer-Relay-Automation-Control-Switch-Module-1601506

Shopping Guide

Shipping	Delivery Period	For in-stock parts, orders are estimated to ship out in 3 days. Elecbee ships orders once a day at about 5pm except Sunday. Once shipped, estimated delivery time depends on the below carriers you chose. DHL Express: 3-7 business days DHLeCommerce: 12-22 business days FedEx International Priority: 3-7 business days EMS: 10-15 business days Registered Air Mail: 15-30 business days
	Shipping Rates	Shipping rates for your order can be found in the shopping cart.
	Shipping Options	Shipping rates for your order can be found in the shopping cart.
	Shipping Tracking	We will notify you by email with tracking number once order is shipped. You can track your order using the “Track My Order” feature.
Returning/Warranty	Returning	Returns are normally accepted when completed within 30 days from date of shipment, please contact customer service for a return authorization. Parts should be unused and in original packaging. Customer has to take charge for the shipping
	Warranty	All Elecbee purchases come with a 30-day money-back return policy, plus 1-year Elecbee warranty against any manufacturing defects.
		This warranty shall not apply to any item where defects have been caused by improper customer assembly failure by customer to follow instructions, product modification, negligent or improper operation
Ordering	How to Buy	Elecbee accepts online orders.
		Add to cart > Check out > Submit order > Complete payment > Delivery
	Payment	PayPal, Credit Card includes Visa, Master, American Express, Bank transfer.