Elecbee YYW-2 0-1024℃ Temperature Sensor Temperature Control Relay Detection High Temperature Serial Output with K Type Thermocouple 30A

SKU: EB0043833

Favorites

Key Features

-Add ms level delay time to prevent output oscillation and cause damage to the entire circuit.

-Can turn off the display for a long time, reducing power consumption

-Synchronous data acquisition serial output

Input supply voltage: DC 7 ~ 30V universal

Output controllable power: DC / AC within 30A

Probe model: K-type thermocouple Wire length 0.5M

Screw head specifications: M6

Resolution: 1 degree

Function Description:

(A and B are the values u200bu200bwe can set by ourselves)

P--1: When the measurement is lower than the temperature value A, the relay is activated, and when the temperature is higher than the temperature value B, the relay is disconnected;

P--2: When the measurement is higher than the temperature value B, the relay is activated, and when the temperature is lower than the temperature value A, the relay is disconnected;

P--3: When the measured temperature is between A and B, the relay is turned off, and the relay is closed in other cases;

P--4: When the measured temperature is between A and B, the relay is closed, otherwise the relay is opened;

P--5: When the measured temperature is higher than the temperature value B, the relay is turned on, and the temperature is lower than the A relay is turned off;

P--6: When the measured temperature is higher than the temperature value A, the relay is activated; it is always activated; until the power is cut off manually

P--7: When the measured temperature is equal to A each time, the relay outputs a jog signal

Setting instructions:

Power-on indicates that the measured temperature enters the standby state;

Press K1 for the first time (it takes more than 1 second to be effective to prevent false triggering), the screen flashes: P --1: K2 plus mode, K3 minus mode

Press K1 a second time, the screen flashes: A025 means: A = 25 degrees: K2 and K3 adjust A

Press K1 a third time, the screen flashes: B035 indicates: B = 35 degrees: K2 and K3 adjust B

Press K1 for the fourth time, the display shows the measured real-time temperature indicating that it has entered the standby state;

Press K4 in standby mode to permanently turn off / on the display and switch the low power consumption mode.

-Add ms level delay time to prevent output oscillation and cause damage to the entire circuit.

-Can turn off the display for a long time, reducing power consumption

-Synchronous data acquisition serial output

Input supply voltage: DC 7 ~ 30V universal

Output controllable power: DC / AC within 30A

Probe model: K-type thermocouple Wire length 0.5M

Screw head specifications: M6

Resolution: 1 degree

Function Description:

(A and B are the values u200bu200bwe can set by ourselves)

P--1: When the measurement is lower than the temperature value A, the relay is activated, and when the temperature is higher than the temperature value B, the relay is disconnected;

P--2: When the measurement is higher than the temperature value B, the relay is activated, and when the temperature is lower than the temperature value A, the relay is disconnected;

P--3: When the measured temperature is between A and B, the relay is turned off, and the relay is closed in other cases;

P--4: When the measured temperature is between A and B, the relay is closed, otherwise the relay is opened;

P--5: When the measured temperature is higher than the temperature value B, the relay is turned on, and the temperature is lower than the A relay is turned off;

P--6: When the measured temperature is higher than the temperature value A, the relay is activated; it is always activated; until the power is cut off manually

P--7: When the measured temperature is equal to A each time, the relay outputs a jog signal

Setting instructions:

Power-on indicates that the measured temperature enters the standby state;

Press K1 for the first time (it takes more than 1 second to be effective to prevent false triggering), the screen flashes: P --1: K2 plus mode, K3 minus mode

Press K1 a second time, the screen flashes: A025 means: A = 25 degrees: K2 and K3 adjust A

Press K1 a third time, the screen flashes: B035 indicates: B = 35 degrees: K2 and K3 adjust B

Press K1 for the fourth time, the display shows the measured real-time temperature indicating that it has entered the standby state;

Press K4 in standby mode to permanently turn off / on the display and switch the low power consumption mode.

Show Less

Specifications

Show Similar Products >

Attribute

Value

Wireless Capability

Bluetooth

Model

DESCRIPTIONIMAGE0

Show Similar Products >

Description

1 x YYW-2 0-1024 ℃ Temperature Sensor Module

1 x K Type Thermocouple Sensor Cable

YYW-2-0-1024-Temperature-Sensor-Temperature-Control-Relay-Detection-High-Temperature-Serial-Output-w-1624679

Shopping Guide

Shipping	Delivery Period	For in-stock parts, orders are estimated to ship out in 3 days. Elecbee ships orders once a day at about 5pm except Sunday. Once shipped, estimated delivery time depends on the below carriers you chose. DHL Express: 3-7 business days DHLeCommerce: 12-22 business days FedEx International Priority: 3-7 business days EMS: 10-15 business days Registered Air Mail: 15-30 business days
	Shipping Rates	Shipping rates for your order can be found in the shopping cart.
	Shipping Options	Shipping rates for your order can be found in the shopping cart.
	Shipping Tracking	We will notify you by email with tracking number once order is shipped. You can track your order using the “Track My Order” feature.
Returning/Warranty	Returning	Returns are normally accepted when completed within 30 days from date of shipment, please contact customer service for a return authorization. Parts should be unused and in original packaging. Customer has to take charge for the shipping
	Warranty	All Elecbee purchases come with a 30-day money-back return policy, plus 1-year Elecbee warranty against any manufacturing defects.
		This warranty shall not apply to any item where defects have been caused by improper customer assembly failure by customer to follow instructions, product modification, negligent or improper operation
Ordering	How to Buy	Elecbee accepts online orders.
		Add to cart > Check out > Submit order > Complete payment > Delivery
	Payment	PayPal, Credit Card includes Visa, Master, American Express, Bank transfer.