SI24R1 NF-01-S 2.4G Wireless Serial Module Transparent Transmission
• DIP-8 ultra-small package, built-in 2.4G antenna, small size, easy to use
• Supports data reception for six channels
• Supports common modulation such as GFSK / FSK
• Supports 2Mbps / 1Mbps / 250Kbps data rate
•Multi-frequency: 126 frequency, to meet the needs of multi-point communication and frequency hopping communication
• Internal integration of high PSRR LDOs
• Wide supply voltage range: 1.9 ~ 3.6V
• Average emission current as low as 110mA
• Receiver sensitivity: -96dBm @ 250kbps
• Maximum transmit power: + 7dBm
• Four-wire SPI interface for up to 10MHz
• Internal Integrated Smart ARQ Baseband Protocol Engine
• Transmit data hardware interrupt output
• Supports 1bit RSSI output
• Low application cost: The SI24R1 integrates all the high-speed signal processing parts associated with the RF protocol, such as automatic retransmission of lost packets and automatic generation of response signals. The SPI interface of the SI24R1 can be connected using the microcontroller's SPI port or using the microcontroller I / O port to simulate, the internal FIFO can be with a variety of high and low speed microprocessor interface, easy to use low-cost single-chip.
• Easy to develop: Since the link layer is fully integrated on the module, it is very easy to develop. Automatic retransmission function, automatic detection and retransmission of lost packets, retransmission time and the number of retransmission software can automatically control the automatic response is not received a reply signal packet automatic response function, after receiving the valid data, the module automatically sends a response Signal, no additional programming Carrier detection - Fixed frequency detection Built-in hardware CRC error detection and point-to-multipoint communication Address control Packet transmission error Counter and carrier detection function can be used for frequency hopping settings can be set at six simultaneous receive channel address, can be selective Of the open receiving channel standard pin DIP 2.54mm pitch interface for easy embedded applications.
Contact Sales
Your Name* | |
Your Email* | |
Topic* | |
Qty | |
Message | |
SUBMIT |
- Description
Description:
NF-01-S is a 100mW power 2.4G wireless module, high-altitude rate (up to 2Mbps), using SPI interface, send and receive in one pure hardware module; high stability, cost performance, Volume, use of all-industry components.
Has been mass production and reached millions of shipments, and applies to a variety of application scenarios.
NF-01-S can be widely used in a variety of networking occasions, suitable for wireless mouse and keyboard, wireless remote control, somatosensory equipment, active RFID, NFC, low power consumption network of wireless sensor networks, is the ideal solution of Internet of Things application.
NF-01-S adopt DIP-8 package, whether learning or mass production, can quickly docked to existing products, no need soldering, direct plug, easy to use.
Information link:
1 x SI24R1 NF-01-S 2.4G Wireless Serial Module
Model | NF-01-S |
Package | DIP-8 |
Size | 28.6*15.3*3.2 mm |
Communication Interface | SPI (The maximum rate of up to 10Mbps) |
Air rate | 250k~2Mbps, 3 Level adjustable(250kbps,1Mbps,2Mbps) |
Spectral range | 2400MHz~2525MHz adjustable, 1MHz Step forward |
Antenna form | Onboard PCB antenna, gain 2dBi |
Maximum transmit power | 7dBm |
Receiving sensitivity | -96dBm@250kbps |
Average current | Emission current: 25mA(7dBm) Receive current: 15mA (2Mbps) Shutdown: current 1.0uA(Shutdown Mode) |
Power supply range | 1.9~3.6V, Typical value 3.3V |
Operating temperature | -20 ℃ ~ 85 ℃ |
Storage environment | -20 ℃ ~ 90 ℃ , < 90%RH |
Pin Explanation:
- Reviews (28)
- All(28)
- Q & A
-
: Where is the origin of Elecbee products? Are they certificated?2023-03-03
-
Answer:
Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.
2023-03-03
-
: What forms of payment do you accept?2023-03-03
-
Answer:
Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.
2023-03-03
-
: When will you arrange shipment?2023-03-03
-
Answer:
After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.
2023-03-03
-
: How to exchange or return?2023-03-03
-
Answer:
1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.
2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;
3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.
2023-03-03
Related Products
ESP32 Dev Module WiFi + bluetooth 4MB Flash Development Board for Arduino
Power Pins: GND - this is the common ground for all power and logic BAT - this is the positive volta..
D1 R2 WiFi ESP8266 Development Board Compatible UNO Program By IDE
The D1 R2 is a mini wifi board based on ESP-8266EX. 11 digital input/output..
10Pcs 1100 Meter Long Distance NRF24L01+PA+LNA Wireless Module With Antenna
10Pcs 1100 Meter Long Distance NRF24L01+PA+LNA Wireless Module With AntennaDesription:NRF24L01P + PA..
8 Buttons 27MHZ 4CH Remote Control with Receiver Board Antenna For DIY SN-RM9
Specifications: Material: plastic + electronic components Color: As shown Electronic freq..