2.4G DL-LN33 Wireless Networking Board UART Serial Port Module CC2530
Num. | Parameter | Parameter value |
1 | Product number | DL-LN33 |
2 | Chip selection | CC2530 |
3 | Working frequency | 2400~2450MHz (16 channels total) |
4 | Communication Interface | UART serial port (supports 13 baud rates, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400, 125000, 250000, 500000) |
5 | Self-organizing network hops | <=15 jump |
6 | Single hop transmission distance | 70 meters (out of the air, no occlusion test) |
7 | Number of points that can be accommodated | The typical value is 190. When the network tends to be dense, the number of nodes decreases, and the minimum value is 96. |
8 | MAX packet length | 63Byte (including port address information) |
9 | Transmission capacity | The transmission rate is higher when only one node sends data: Because the routing information of the transmitted packet occupies a certain bandwidth, the longer the length of each packet, the higher the transmission efficiency. 2400 Bit/s when each package contains 3 bytes of data. 10KBit/s when each package contains 30 bytes of data. |
13 | MAX send rate | 250KBit/s |
14 | Packet retransmission times | Up to 15 times, at least 5 times when the network load is high |
15 | Air delay | Single-hop between nodes, less than 10mS |
16 | Transmit power | 4. 5dBm |
17 | Operating Voltage | 2. 5V~3. 6V |
18 | Working current | Less than 30mA |
19 | Antenna interface | PCB antenna |
Pin Descriptions:
Pin name | Pin position | Significance |
NoUsed | 1, 2,10,11,13 | Not used, please keep it empty (empty refers to not connected to any circuit) |
TestMode | 3 | Test mode, when working in normal mode in empty, grounding works in test mode. Please use it empty when the user is using it. |
TestTx | 4 | Enter test information in test mode, which will be output as a controllable IO port when the user uses it. |
TestRx | 5 | Enter test information in test mode, which will be output as a controllable IO port when the user uses it. |
Gnd | 6, 9,16 | Ground |
Vcc | 7,8 | Power supply |
BaudReset | 12 | If this pin is grounded first and then the module is started, the module will force a 115200 default baud rate to operate. In this mode, the baud rate of the module can be read or set. The baud rate read is the baud rate previously set by the module, not 115200. If the baud rate setting is not performed, the module will be restarted again. Work with the previously set baud rate. |
Tx | 14 | Uart output of the module |
Rx | 15 | Uart input of the module |
Contact Sales
Your Name* | |
Your Email* | |
Topic* | |
Qty | |
Message | |
SUBMIT |
- Reviews (28)
- All(28)
- Q & A
-
: Where is the origin of Elecbee products? Are they certificated?2023-03-03
-
Answer:
Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.
2023-03-03
-
: What forms of payment do you accept?2023-03-03
-
Answer:
Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.
2023-03-03
-
: When will you arrange shipment?2023-03-03
-
Answer:
After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.
2023-03-03
-
: How to exchange or return?2023-03-03
-
Answer:
1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.
2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;
3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.
2023-03-03
Related Products
3pcs ESP32 WiFi+Bluetooth Development Board Ultra-Low Power Consumption Dual Cores Unsoldered
3 x ESP32 Development Board(unsoldered)Description: ESP32 is already integrated antenna and RF balun..
ESP32 Dev Module WiFi + bluetooth 4MB Flash Development Board for Arduino
Power Pins: GND - this is the common ground for all power and logic BAT - this is the positive volta..
10Pcs Wireless NodeMcu Lua CH340G V3 Based ESP8266 WIFI Internet of Things IOT Development Module
Voltage: DC5VPrecise details>>Precise details:Specifications: Size: Approx. 5.7x3x1cm/ 2.24x1.18x0.3..
8 Buttons 27MHZ 4CH Remote Control with Receiver Board Antenna For DIY SN-RM9
Specifications: Material: plastic + electronic components Color: As shown Electronic freq..