Satellite Positioning GPS Module For 51MCU STM32 for Arduino - products that work with official Arduino boards
1, with USB Micro interface, the use of ordinary mobile phone data line can debug GPS module, no longer need to use USB-TTL and other tools.
2, set aside a TTL interface, you can easily use the USB-TTL or external MCU control to receive GPS information.
3, module board loaded ceramic antenna, the open place without GPS external antenna can be put on the search satellite.
4, set aside SMA antenna interface, can use the external antenna, the ability to search more satellite
Pin definition:
1, VCC: power supply (3.3V-5V)
2, GND: ground wire
3, TXD: module serial port to send pin (TTL level, can not be directly connected to the RS232 level, can be connected to the microcontroller RXD)
4, RXD: module serial port receive pin (TTL level, can not be directly connected to the RS232 level, can be connected to the microcontroller TXD)
5, PPS: clock pulse output pin.
GPS second pulse signal PPS one second, it is used to indicate the role of the whole second moment, and the time is usually marked with the rising edge of PPS seconds pulse. Because GPS can give UTC time, but received the user is there will be a delay, then in order to get the precise timing, the introduction of PPS signal rising edge to indicate the UTC whole seconds in time, the accuracy can be to a nanosecond, and no accumulated error.
Contact Sales
Your Name* | |
Your Email* | |
Topic* | |
Qty | |
Message | |
SUBMIT |
- Description
Working voltage 3.3v-5.0v
Current: 40mA
Default baud rate: 9600 (can be modified via U-CENTER)
Output frequency: 1Hz (can be modified by U-CENTER)
Module
1 x GPS Satellite Positioning Module
- Reviews (29)
- All(29)
- Q & A
-
: Where is the origin of Elecbee products? Are they certificated?2023-03-03
-
Answer:
Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.
2023-03-03
-
: What forms of payment do you accept?2023-03-03
-
Answer:
Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.
2023-03-03
-
: When will you arrange shipment?2023-03-03
-
Answer:
After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.
2023-03-03
-
: How to exchange or return?2023-03-03
-
Answer:
1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.
2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;
3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.
2023-03-03
Related Products
ESP32 Dev Module WiFi + bluetooth 4MB Flash Development Board for Arduino
Power Pins: GND - this is the common ground for all power and logic BAT - this is the positive volta..
2.4G Wireless Module CC2530 RF Chip IPEX Interface 100mW for CC2530+PA Zig bee Development Board
>>>Manual: Click here to open..
5pcs BH1750FVI Digital Light Intensity Sensor Module 3V-5V Power for Arduino
5pcs BH1750FVI Digital Light Intensity Sensor Module For AVR 3V-5V Power 5 x BH1750FVI Digital Ligh..
3pcs 3S NiMH NiCd Rechargeable Battery Charger Charging Module Board Input DC 5V
Descriptions: 3-Cell(3S) Version: Input voltage : DC 4.5V-5.5V(Recommend DC 5V)Charging volt..