- 商品详情
产品电气特性:
湿度测量范围:0%RH ~99.9%RH
测温范围:-40℃~80℃
分辨力:湿度 0.1%RH,温度 0.1
测量精度:±3%RH; ±0.5%℃
控制精度:0.1%RH; ±0.1%℃
刷新率:1S
输入电压:5V~24V DC
测量输入:AM2301温湿度一体传感器
输出:两路10A继电器
环境要求:-10℃--60℃,湿度20%--85%
整体功耗:静态电流≤20ma,拉电流≤50ma。
功能:
- 具有温湿度控制功能。
- 可实时显示当前温度和湿度。
- 具有超限报警功能。
- 继电器工作指示功能。
- 具有电源反接保护功能。当电源接上计数器时控制器不工作。
指示灯:
1、D8为温度继电器指示灯。当D8灯亮时,加热(冷却)设备开始工作。
2. D9 is a humidity indicator relayindicator lamp.Humidification/dehumidificationequipment began to work when the D9 light is turn on.
3. The display is showing the real time humidity valuewhen the green D5 light is turn on.The display is showing the real time temperature valuewhen the D5 lamp goes out.
功能说明:
1、高温启动-冷却方式:
Refrigeration equipmentbegins toworkwhen the starting temperature value is greater than the stop temperature value and the temperaturemeasurement is greater than or equal to the beginning temperature.Refrigeration equipment will stop workingwhen the temperaturemeasurementis less than or equal to the stop temperature.
For example,Set the starting temperature to 20℃,Stop temperature is 15℃,D8 light is turn on and refrigeration equipment work when the detection temperature is greater than or equal to 20℃.D8 lightwent offand refrigeration equipment will stop workingwhen the temperature value is less than 15℃.
2.低温启动-加热方式:
Heating equipment begins to workwhen the starting temperature value is less than the stop temperature value and the temperature is less than or equal to the beginning temperature.Heating equipment will stop workingwhen the test temperature is greater than or equal to the stop temperature.
For example,Set the starting temperature to 15℃,Stop temperature is 20℃.D8 lights is turn onand Heating equipment begins to workwhen the temperature measurementvalue is less than or equal to 15℃. D8lightwent off and Heating equipment to stop workingwhen the temperature measurementvalue is greater than or equal to the stop temperature.
3. 高湿启动-干燥剂模式:
The system automatically determines the mode of the dehumidificationwhen the startting humidity value is higher than the value of the stop humidity.In this mode,dehumidificationequipment to start workwhen humidity detection is greater than or equal to the beginning of humidity.Dehumidificationequipmentwill stop workingwhen the humidity detection is less than or equal to the stop humidity.
For example,Set the starting humidity to 60%RH,Stop humidity is 40%RH.Indicator light D9 lamp is turn onand dehumidificationequipmentstart to workwhen the detected humidity value greater than or equal to 60%RH.Indicator light D9 went off and dehumidificationequipmentto stop workingwhen Humidity detection value is less than or equal to 40%RH.
4. Low humidity start-humidification mode
The system automatically enters the humidification modewhen the set start humidity is less than the value of the humidity value.In this mode,Humidification equipment began to workwhen the humidity detection is less than or equal to the beginning of humidity. Humidification equipment will stop workingwhen the humidity detection is Greater than or equal to the beginning of humidity.
For example,Set the starting humidity to 40%RH,Stop humidity is 60%RH, Indicator light D9 is turn on andhumidification equipment into the workwhen the humidity detection value is less than or equal to 40%RH.Indicator light D9 went off and humidification equipmentto stop workingthe humidity detection value isgreater than or equal to 60%RH.
5、温度报警方式:
显示屏显示Axx(默认为A00)并在开机时闪烁3秒,您可以使用“+”和“-”设置警报
Mode,Alarm modes are defined as follows:
A00:报警功能关闭(默认)
A01:当前检测到的湿度超过启动温度或停止温度1℃,蜂鸣器报警。
A02:当前检测到的湿度超过启动温度或停止温度2℃,蜂鸣器报警。
A03:当前检测到的湿度超过启动温度或停止温度3℃,蜂鸣器报警。
and so on,max can be set A30.
For example ,Set alarm mode A03,Starting temperature is20℃,Stop temperatureis30℃, Buzzer sound alarm when the measured temperature is above 33℃or below 17℃ .
具体设置方法:
Notes:The following settings are automatically saved to EEPROM
1.设置起始温度:
Long press S button for 3 seconds,Red light D3 start flashing. Display showing starting temperature value at this moment, Press + and - button to adjust this value, Long press is continuous adjustment. Long press S button to exit the adjustmentafter the adjustment is completedor automatic exit without key action in 10S.
2.设置停止温度:
Long press S button for 3 seconds,Red light D3 start flashing. Short press SET button once againand red LED D3 long bright,Display showing stoptemperature value at this moment,Press + and - button to adjust this value,Long press is continuous adjustment.Long press S button to exit the adjustmentafter the adjustment is completedor automatic exit without key action in 10S.
3. Set up the startinghumidity:
Long press S button for 3 seconds,Red light D3 start flashing.Short press SET buttontwice againand red LED D4start flashing.The display screen displays the starting humidity value, this value can be adjusted by pressing the + and - buttons,long press is continuous adjustment.Long press S button to exit the adjustmentafter the adjustment is completedor automatic exit without key action in 10S.
4.设置停止湿度
Long press S button for 3 seconds,Red light D3 start flashing.Short press SET buttonthree times againand red LED D4start flashing.Display screen displays the value of the stop humidity at this time, this value can be adjusted by pressing the + and – buttons, long press is continuous adjustment.Long press S button to exit the adjustmentafter the adjustment is completedor automatic exit without key action in 10S.
5.设置温度模型
Long press S button for 3 seconds,Red light D3 start flashing.Short press SET buttonfourtimes againand red LED D3 and LED D4startflashingatthesametime. At this time the display screen display "C" or "F", this value can be adjusted by pressing the + and – buttons.C means that the current temperature model is degrees Celsius,F means that the current temperature pattern is Fahrenheit.Long press S button to exit the adjustmentafter the adjustment is completedor automatic exit without key action in 10S.
6.设置闹钟模式
另见“功能说明” 5.温度报警方式。
7.恢复出厂设置
Hold + and - press the button and then boot,Display screen display "rrrr",All settings are restored to factory settings after Buzzer sound threetimes.
指示灯状态:
套餐包括:
1 x 温湿度控制模块
1 个传感器
1 x 连接电缆
湿度测量范围:0%RH
测温范围:-40℃~80℃
分辨力:湿度 0.1%RH,温度 0.1
测量精度:±3%RH; ±0.5%℃
控制精度:0.1%RH; ±0.1%℃
刷新率:1S
输入电压:5V~24V DC
测量输入:AM2301温湿度一体传感器
输出:两路10A继电器
环境要求:-10℃--60℃,湿度20%--85%
整体功耗:静态电流≤20ma,拉电流≤50ma。
功能:
- 具有温湿度控制功能。
- 可实时显示当前温度和湿度。
- 具有超限报警功能。
- 继电器工作指示功能。
- 具有电源反接保护功能。当电源接上计数器时控制器不工作。
指示灯:
1、D8为温度继电器指示灯。当D8灯亮时,加热(冷却)设备开始工作。
2. D9 is a humidity indicator relayindicator lamp.Humidification/dehumidificationequipment began to work when the D9 light is turn on.
3. The display is showing the real time humidity valuewhen the green D5 light is turn on.The display is showing the real time temperature valuewhen the D5 lamp goes out.
功能说明:
1、高温启动-冷却方式:
Refrigeration equipmentbegins toworkwhen the starting temperature value is greater than the stop temperature value and the temperaturemeasurement is greater than or equal to the beginning temperature.Refrigeration equipment will stop workingwhen the temperaturemeasurementis less than or equal to the stop temperature.
For example,Set the starting temperature to 20℃,Stop temperature is 15℃,D8 light is turn on and refrigeration equipment work when the detection temperature is greater than or equal to 20℃.D8 lightwent offand refrigeration equipment will stop workingwhen the temperature value is less than 15℃.
2.低温启动-加热方式:
Heating equipment begins to workwhen the starting temperature value is less than the stop temperature value and the temperature is less than or equal to the beginning temperature.Heating equipment will stop workingwhen the test temperature is greater than or equal to the stop temperature.
For example,Set the starting temperature to 15℃,Stop temperature is 20℃.D8 lights is turn onand Heating equipment begins to workwhen the temperature measurementvalue is less than or equal to 15℃. D8lightwent off and Heating equipment to stop workingwhen the temperature measurementvalue is greater than or equal to the stop temperature.
3. 高湿启动-干燥剂模式:
The system automatically determines the mode of the dehumidificationwhen the startting humidity value is higher than the value of the stop humidity.In this mode,dehumidificationequipment to start workwhen humidity detection is greater than or equal to the beginning of humidity.Dehumidificationequipmentwill stop workingwhen the humidity detection is less than or equal to the stop humidity.
For example,Set the starting humidity to 60%RH,Stop humidity is 40%RH.Indicator light D9 lamp is turn onand dehumidificationequipmentstart to workwhen the detected humidity value greater than or equal to 60%RH.Indicator light D9 went off and dehumidificationequipmentto stop workingwhen Humidity detection value is less than or equal to 40%RH.
4. Low humidity start-humidification mode
The system automatically enters the humidification modewhen the set start humidity is less than the value of the humidity value.In this mode,Humidification equipment began to workwhen the humidity detection is less than or equal to the beginning of humidity. Humidification equipment will stop workingwhen the humidity detection is Greater than or equal to the beginning of humidity.
For example,Set the starting humidity to 40%RH,Stop humidity is 60%RH, Indicator light D9 is turn on andhumidification equipment into the workwhen the humidity detection value is less than or equal to 40%RH.Indicator light D9 went off and humidification equipmentto stop workingthe humidity detection value isgreater than or equal to 60%RH.
5、温度报警方式:
显示屏显示Axx(默认为A00)并在开机时闪烁3秒,您可以使用“+”和“-”设置警报
Mode,Alarm modes are defined as follows:
A00:报警功能关闭(默认)
A01:当前检测到的湿度超过启动温度或停止温度1℃,蜂鸣器报警。
A02:当前检测到的湿度超过启动温度或停止温度2℃,蜂鸣器报警。
A03:当前检测到的湿度超过启动温度或停止温度3℃,蜂鸣器报警。
and so on,max can be set A30.
For example ,Set alarm mode A03,Starting temperature is20℃,Stop temperatureis30℃, Buzzer sound alarm when the measured temperature is above 33℃or below 17℃
具体设置方法:
Notes:The following settings are automatically saved to EEPROM
1.设置起始温度:
Long press S button for 3 seconds,Red light D3 start flashing. Display showing starting temperature value at this moment, Press + and - button to adjust this value, Long press is continuous adjustment. Long press S button to exit the adjustmentafter the adjustment is completedor automatic exit without key action in 10S.
2.设置停止温度:
Long press S button for 3 seconds,Red light D3 start flashing. Short press SET button once againand red LED D3 long bright,Display showing stoptemperature value at this moment,Press + and - button to adjust this value,Long press is continuous adjustment.Long press S button to exit the adjustmentafter the adjustment is completedor automatic exit without key action in 10S.
3. Set up the startinghumidity:
Long press S button for 3 seconds,Red light D3 start flashing.Short press SET buttontwice againand red LED D4start flashing.The display screen displays the starting humidity value, this value can be adjusted by pressing the + and - buttons,long press is continuous adjustment.Long press S button to exit the adjustmentafter the adjustment is completedor automatic exit without key action in 10S.
4.设置停止湿度
Long press S button for 3 seconds,Red light D3 start flashing.Short press SET buttonthree times againand red LED D4start flashing.Display screen displays the value of the stop humidity at this time, this value can be adjusted by pressing the + and – buttons, long press is continuous adjustment.Long press S button to exit the adjustmentafter the adjustment is completedor automatic exit without key action in 10S.
5.设置温度模型
Long press S button for 3 seconds,Red light D3 start flashing.Short press SET buttonfourtimes againand red LED D3 and LED D4startflashingatthesametime. At this time the display screen display "C" or "F", this value can be adjusted by pressing the + and – buttons.C means that the current temperature model is degrees Celsius,F means that the current temperature pattern is Fahrenheit.Long press S button to exit the adjustmentafter the adjustment is completedor automatic exit without key action in 10S.
6.设置闹钟模式
另见“功能说明” 5.温度报警方式。
7.恢复出厂设置
Hold + and - press the button and then boot,Display screen display "rrrr",All settings are restored to factory settings after Buzzer sound threetimes.
指示灯状态:
套餐包括:
1 x 温湿度控制模块
1 个传感器
1 x 连接电缆
- 商品评价
- 全部(29)
- 商品咨询
-
:Elecbee产品的起源在哪里?它们是否获得了认证?2023-03-03
-
店主回复:
Elecbee与中国的OEM工厂长期合作,以此来降低中间渠道成本,帮助您节省开支。我们的产品都是严格按照相关全球标准制作的,以确保产品具有良好的兼容性和卓越的品质。
2023-03-03
-
:您接受哪些付款方式?2023-03-03
-
店主回复:
我们的主要付款方式包括Paypal、信用卡、借记卡、银行转账等等,更多付款方式等待您的发现。请选取您喜欢的付款方式。
2023-03-03
-
:您何时安排发货?2023-03-03
-
店主回复:
在确认收到您的付款后,我们会尽快安排送货,并上传快递单号至网站,以供您跟踪。
2023-03-03
-
:如何进行退换货?2023-03-03
-
店主回复:
1.您可以在收到商品后的30天内申请退货。请确保外包装完好无损,产品保持原状。一旦我们收到包裹,根据相关规定安排退款。
2.退货流程:提交退货申请 - 审核通过退货申请 - 安排退货 - 收到商品并检查 - 我们安排退款。
3.对于因我们造成的退货,例如质量问题,我们将承担运费。对于由买家造成的退货,买家应负责运费。
2023-03-03
相关商品
品牌::
Elecbee
型号:: EB0042993
MH-Z19B 升级版 0-5000PPM 红外线 CO2 传感器用于 CO2 室内空气质量监测器 UART/PWM
描述:产品型号:MH-Z19B(请注意此商品非winsen品牌。)颜色:金色尺寸(长*宽*高):33 x 20 x 9 毫米目标气体:CO2工作电压:3.6 ~ 5.5 V DC平均电流:< 1..
$24.99
+
-
+
-
品牌::
Elecbee
型号:: EB0043809
DHT22 单总线数字温湿度传感器模块电子积木 AM2302 3.3V-5V DC
电压:DC3.3V,DC5V准确的细节>>准确的细节:规格:工作电压:3V - 5.5V信号输出形式:数字信号温度测量范围:- 40°c 至 80°c测量精度:0.5°c湿度测量范围:0-100% R..
$7.99
+
-
品牌::
Elecbee
型号:: EB0043906
适用于 Arduino 的 5 件红外避障传感器智能汽车机器人
用于智能汽车机器人的 5 件红外避障传感器描述:感应模组灯适应环境,工作电压为3.3V到5V。它有一对红外发射和接收管,当探测方向遇到障碍物(反射面)时,反射的红外线被管接收。经过比较器电路处理后,绿..
$7.99
+
-