Elecbee MATEKSYS H743-WLITE Flight Controller

Description

The MATEKSYS H743-WLITE Flight Controller is equipped with STM32H743VIH6, ICM42688-P, DPS310, OSD, 7 UARTs, 1 CAN, 2x I2C, 12x PWM outputs, and 3x BEC and other cool features that make this FC a winner in the wing game!

 

Features

Equipped with BEC 5V output, which is designed for the flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed

Equipped with BEC 9V/12V output, which is designed for Video Transmitter, Camera, Gimbal, etc.

Equipped with MATEKH743 firmware

 

 

Specifications

MCU: STM32H743VIH6, 480MHz, 512KB RAM, 2MB Flash

IMU: ICM42688-P

Baro: DPS310 (I2C2)

OSD: AT7456E

Blackbox: MicroSD card slot (SDIO)

7x Uarts (1,2,3,4,6,7,8) with built-in inversion.

13x PWM outputs(12+LED)

6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)

3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)

2x I2C

1x CAN

USB/Beep Extender with Type-C(USB2.0)

Dual Camera Inputs switch

9V(12V) for VTX power switch

High-precision Current Sense, 220A range

ADC VB2 voltage divider: 1K:20K

ADC AirSpeed voltage divider: 20K:20K

 

FC Firmware

INAV: MATEKH743

ArduPilot: MATEKH743

 

PDB

Input voltage range: 6.8~30V (2~6S LiPo)

1x ESC power pads

Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)

Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)

Sense resistor: 90A continuous, 220A peak

 

BEC 5V output

Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed

Continuous current: 2 Amps, Max.3A

  

BEC 9V /12V output

Designed for Video Transmitter, Camera, Gimbal ect.

Continuous current: 2 Amps, Max.3A

12V option with Jumper pad

for stable 9V/12V output, input voltage should > output voltage +1V

 

BEC Vx output

Designed for Servos

Voltage adjustable, 5V Default, 6V or 7.2V via jumper

Continuous current: 8 Amps, Max.10A

for stable Vx output, input voltage should > Vx voltage +1V

 

BEC 3.3V output

Designed for Baro / Compass module and external 3.3V peripherals

Linear Regulator

Continuous current: 200mA

 

 

Physical

Mounting: 25 x 25mm, 2mm

Dimensions: 44 x 29 x 14.5 mm

Weight: 22g w/ USB/buzzer adapter

 

package inclusion

1x H743-WLITE

1x USB(Type-C)/Beep (Passive buzzer) Extender

1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.

2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port

1x Rubycon ZLH 35V 470uF capacitor

Dupont 2.54 pins (Board is shipped unsoldered)