Elecbee Holybro Pix32 V6 Modular Flight Controller

The Holybro Pix32 V6 Modular Flight Controller is the latest update to the pix32 v5 flight controllers. This FC is a variant of the Pixhawk 6C and is comprised of a separate flight controller and carrier board which is connected by a 100-pin connector. The Pix32 V6 is designed for those pilots who need a high-power, flexible, and customizable flight control system.

Specifications

Processors & Sensors FMU Processor: STM32H743 32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM 

IO Processor: STM32F103 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM 

On-board sensors Accel/Gyro: ICM-42688-P 

Accel/Gyro: BMI055 

Mag: IST8310 

Barometer: MS5611 

Electrical data Voltage Ratings: Max input voltage: 6V 

USB Power Input: 4.75~5.25V 

Servo Rail Input: 0~36V 

Current Ratings: Telem1 Max output current limiter: 1.5A 

All other port combined output current limiter: 1.5A 

Mechanical data FC Module Connector Type: Panasonic-AXK5S-6S 

Dimensions: N/A 

Weight: N/A 

Interfaces 16- PWM servo outputs (8 from IO, 8 from FMU) 

3 general purpose serial ports Telem1 - Full flow control, separate 1.5A current limit 

Telem2 - Full flow control 

Telem3 

2 GPS ports GPS1 - Full GPS port (GPS plus safety switch) 

GPS2 - Basic GPS port 

1 I2C port Supports dedicated I2C calibration EEPROM located on sensor module 

2 CAN Buses 

2 Debug port FMU Debug 

I/O Debug 

Dedicated R/C input for Spektrum / DSM and S.BUS, CPPM, analog / PWM RSSI 

Dedicated S.BUS output 

2 Power input ports (Analog) 

Package Inclusion

1x Holybro Pix32 V6 Modular Flight Controller