Elecbee FT2232HL USB to UART/FIFO/SPI/I2C/JTAG/RS232 Converter Module External Memory Dual Channel

SKU: EB0050533

Favorites

Key Features

1. USB supply voltage: DC5V, USB 2.0 full speed compatible.

2. Built-in 3.3V / 1.8V LD0 regulator.

3. Extended operating temperature range: -40 ° C ~ 85 ° C

4. 20-pin SSOP and QFN packages (RoHS compliant).

5. Compatible with UHGI / 0HGI / EHCI host controller

6. Integrated power-on-reset circuit.

7. The data transfer rate is 1 megabyte per second.

8. Each chip has a pre-programmed unique USB serial number.

9. Supports bus-powered, self-powered and high-power bus-powered USB configurations.

10. Built-in + 3.3V level shifter for USB I/O.

11. Built-in + 3.3V level shifter for USB I/O.

12. True 3.3V CMOS driver output and TTL input. (Working voltage drops to 1V8 through external pull-up resistor)

13. I/O voltage levels range from 1.8V to 3.3V (withstand voltage to 5V). The drive current of the I/O pin can be configured.

14. The entire USB protocol is processed on this chip and does not require USB-specific firmware programming.

15. FT1248 serial parallel interface, using 1, 2, 4, or 8-bit horizontal, similar to the SPI slave 1-bit mode.

16. Integrated 2048-byte multiple-programmable (MTP) memory for storage device description and CBUS I/O configuration.

17. Integrated clock generator eliminates the need for an external crystal and has a clock output option for seamless connection to an external MCU or FPGA.

18. 512-byte receive buffer and 512-byte transmit buffer, using buffer technology to achieve 髙 data throughput.

19. Battery charger detection. The mobile device can use it to detect the presence of a charger on the USB port for higher current/faster charging of the battery.

20. Low operating current of 8 mA (typ) and USB suspend current of 125 μA (typ). Low USB bandwidth consumption.

21. FTDI's Virtual COM Port (VCP) and Direct (D2XX) drivers are in most cases exempt from USB driver development requirements.

Typical application:

xa0

Single-chip USB to dual-channel UART (RS232, RS422 or RS485).

MCU USB to dual channel FIFO.

MCU USB to dual channel JTAG.

MCU USB to dual channel SPI

MCU USB to dual channel I2C

MCU USB to dual channel

Dual combination of single-chip USB to the above interface

Single-chip USB to dual channel interface.

Idle serial optical interface.

The target interface (such as memory) of the MCU USB to the CPU is independent of the two machines.

Show More

1. USB supply voltage: DC5V, USB 2.0 full speed compatible.

2. Built-in 3.3V / 1.8V LD0 regulator.

3. Extended operating temperature range: -40 ° C ~ 85 ° C

4. 20-pin SSOP and QFN packages (RoHS compliant).

5. Compatible with UHGI / 0HGI / EHCI host controller

6. Integrated power-on-reset circuit.

7. The data transfer rate is 1 megabyte per second.

8. Each chip has a pre-programmed unique USB serial number.

9. Supports bus-powered, self-powered and high-power bus-powered USB configurations.

10. Built-in + 3.3V level shifter for USB I/O.

11. Built-in + 3.3V level shifter for USB I/O.

12. True 3.3V CMOS driver output and TTL input. (Working voltage drops to 1V8 through external pull-up resistor)

13. I/O voltage levels range from 1.8V to 3.3V (withstand voltage to 5V). The drive current of the I/O pin can be configured.

14. The entire USB protocol is processed on this chip and does not require USB-specific firmware programming.

15. FT1248 serial parallel interface, using 1, 2, 4, or 8-bit horizontal, similar to the SPI slave 1-bit mode.

16. Integrated 2048-byte multiple-programmable (MTP) memory for storage device description and CBUS I/O configuration.

17. Integrated clock generator eliminates the need for an external crystal and has a clock output option for seamless connection to an external MCU or FPGA.

18. 512-byte receive buffer and 512-byte transmit buffer, using buffer technology to achieve 髙 data throughput.

19. Battery charger detection. The mobile device can use it to detect the presence of a charger on the USB port for higher current/faster charging of the battery.

20. Low operating current of 8 mA (typ) and USB suspend current of 125 μA (typ). Low USB bandwidth consumption.

21. FTDI's Virtual COM Port (VCP) and Direct (D2XX) drivers are in most cases exempt from USB driver development requirements.

Typical application:

xa0

Single-chip USB to dual-channel UART (RS232, RS422 or RS485).

MCU USB to dual channel FIFO.

MCU USB to dual channel JTAG.

MCU USB to dual channel SPI

MCU USB to dual channel I2C

MCU USB to dual channel

Dual combination of single-chip USB to the above interface

Single-chip USB to dual channel interface.

Idle serial optical interface.

The target interface (such as memory) of the MCU USB to the CPU is independent of the two machines.

Show Less

Description

>>>File download: Click here to open<<<

1 x Converter

FT2232HL-USB-to-UARTFIFOSPII2CJTAGRS232-Converter-Module-External-Memory-Dual-Channel-1548821

FT2232HL-USB-to-UARTFIFOSPII2CJTAGRS232-Converter-Module-External-Memory-Dual-Channel-1548821

FT2232HL-USB-to-UARTFIFOSPII2CJTAGRS232-Converter-Module-External-Memory-Dual-Channel-1548821

FT2232HL-USB-to-UARTFIFOSPII2CJTAGRS232-Converter-Module-External-Memory-Dual-Channel-1548821

FT2232HL-USB-to-UARTFIFOSPII2CJTAGRS232-Converter-Module-External-Memory-Dual-Channel-1548821

FT2232HL-USB-to-UARTFIFOSPII2CJTAGRS232-Converter-Module-External-Memory-Dual-Channel-1548821

FT2232HL-USB-to-UARTFIFOSPII2CJTAGRS232-Converter-Module-External-Memory-Dual-Channel-1548821

Shopping Guide

Shipping	Delivery Period	For in-stock parts, orders are estimated to ship out in 3 days. Elecbee ships orders once a day at about 5pm except Sunday. Once shipped, estimated delivery time depends on the below carriers you chose. DHL Express: 3-7 business days DHLeCommerce: 12-22 business days FedEx International Priority: 3-7 business days EMS: 10-15 business days Registered Air Mail: 15-30 business days
	Shipping Rates	Shipping rates for your order can be found in the shopping cart.
	Shipping Options	Shipping rates for your order can be found in the shopping cart.
	Shipping Tracking	We will notify you by email with tracking number once order is shipped. You can track your order using the “Track My Order” feature.
Returning/Warranty	Returning	Returns are normally accepted when completed within 30 days from date of shipment, please contact customer service for a return authorization. Parts should be unused and in original packaging. Customer has to take charge for the shipping
	Warranty	All Elecbee purchases come with a 30-day money-back return policy, plus 1-year Elecbee warranty against any manufacturing defects.
		This warranty shall not apply to any item where defects have been caused by improper customer assembly failure by customer to follow instructions, product modification, negligent or improper operation
Ordering	How to Buy	Elecbee accepts online orders.
		Add to cart > Check out > Submit order > Complete payment > Delivery
	Payment	PayPal, Credit Card includes Visa, Master, American Express, Bank transfer.

Reviews

ELECBEE

All reviews come from verified purchasers

5

0%

4

0%

3

0%

2

0%

1

0%

In-Stock:9999

Qty.

1

Unit Price

$ 23.79$ 27.99

Ext. Price

$ 23.79$ 27.99

$ 23.79$ 27.99

Can Ship in 1-3 Business Days