商品图

Elecbee DC 15A 500W Brushless Motor Controller BLDC Driver Board With Stall Over-current Protection

SKU: EB0048600
Favorites

Key Features

Show More
Description
Specification:
 
Operating voltage: DC 12V-36V
Operating Current: <=15A
Driver Power: <=500W
Speed Voltage: 0.1V-5V
Operating Temperature: -40~85°C
Humidity: 90%RH
Stall protection: Yes
Enable Control: Yes
Over-current protection: Yes
Steering control: Yes
Speed control signal: Yes
Size: 63 x 42 x 17mm (L x W x H); Probe size 3mm, length: fixing hole center distance 57mm; width: fixed hole center distance 36.5mm
 
Power terminal Out:
 
VCC(positive power supply)
GND(negative one)
MC(motor phases W)
MB(motor phases V)
MA(motor phase U)
 
Set for the control side:
 
GND: control terminal ground
VR: the governor end 0-5V(corresponding to 10% of motor speed -100%)
ZF: reversing control(connected to 5V or ground can charge the motor rotation direction)
M: tachometer pulse output(depending on the number of motor poles corresponding to the number of pulse per revolution of the output number)
EL: enable control terminal(connected to 5V ot ground running then 5V, grounding the motor stops)
5V: 5V control terminal
 
Wiring:
 
Control terminal for SET:
 
1. The motor speed control wiring methods: available potentiometer system speed can also be connected to the MCU control, when the potentiometer control wiring, the potentiometer middle pin is connected to VR speed port, potentiometer connected to both ends of 5V and GND terminal voltage more high speed faster.
2. Motor steering control wiring methods: you can switch control can also be connected to the MCU control, to GND in one direction, then in one direction 5V.
3. Pulse speed signal: high and low output . IC can not understand the information with the customer request.
 
Note: 
 
Motor driver board 12-36V DC power input, VCC positive power supply,GND power supply is negative.
Electrical wiring methods: Brushless DC motor for the three lines, corresponding MA/U, MB/V, MC/W
 
Tips:
 
If you use less than 60W, without additional heat sink , be sure to add more than 60W 
heatsink fins drive efficiency without lowering the temperature is too high will shine into permanent damage! The size of the heat sink may be a bad environment based work(recommended cooling surface area greater than 200 square centimeters)!When installing the heat sink ,must pay attention to the back of the module 6 MOS pipe insulation, no insulation, it will be adhered to drive plate permanently damaged! Proposes to add insulation films, both sides of the insulating sheet plus thermal grease!
 
 
1 x 12-36V 500W Brushless Motor Controler



DC-12V-36V-15A-500W-Brushless-Motor-Controller-BLDC-Driver-Board-With-Stall-Over-current-Protection--1311915

DC-12V-36V-15A-500W-Brushless-Motor-Controller-BLDC-Driver-Board-With-Stall-Over-current-Protection--1311915

DC-12V-36V-15A-500W-Brushless-Motor-Controller-BLDC-Driver-Board-With-Stall-Over-current-Protection--1311915

DC-12V-36V-15A-500W-Brushless-Motor-Controller-BLDC-Driver-Board-With-Stall-Over-current-Protection--1311915

DC-12V-36V-15A-500W-Brushless-Motor-Controller-BLDC-Driver-Board-With-Stall-Over-current-Protection--1311915

DC-12V-36V-15A-500W-Brushless-Motor-Controller-BLDC-Driver-Board-With-Stall-Over-current-Protection--1311915

DC-12V-36V-15A-500W-Brushless-Motor-Controller-BLDC-Driver-Board-With-Stall-Over-current-Protection--1311915

DC-12V-36V-15A-500W-Brushless-Motor-Controller-BLDC-Driver-Board-With-Stall-Over-current-Protection--1311915

DC-12V-36V-15A-500W-Brushless-Motor-Controller-BLDC-Driver-Board-With-Stall-Over-current-Protection--1311915
Shopping Guide
Shipping
Delivery Period
For in-stock parts, orders are estimated to ship out in 3 days.
Elecbee ships orders once a day at about 5pm except Sunday.
Once shipped, estimated delivery time depends on the below carriers you chose.
DHL Express: 3-7 business days
DHLeCommerce: 12-22 business days
FedEx International Priority: 3-7 business days
EMS: 10-15 business days
Registered Air Mail: 15-30 business days
Shipping RatesShipping rates for your order can be found in the shopping cart.
Shipping OptionsShipping rates for your order can be found in the shopping cart.
Shipping TrackingWe will notify you by email with tracking number once order is shipped. You can track your order using the “Track My Order” feature.
Returning/WarrantyReturningReturns are normally accepted when completed within 30 days from date of shipment, please contact customer service for a return authorization. Parts should be unused and in original packaging. Customer has to take charge for the shipping
WarrantyAll Elecbee purchases come with a 30-day money-back return policy, plus 1-year Elecbee warranty against any manufacturing defects.
This warranty shall not apply to any item where defects have been caused by improper customer assembly failure by customer to follow instructions, product modification, negligent or improper operation
OrderingHow to BuyElecbee accepts online orders.
Add to cart > Check out > Submit order > Complete payment > Delivery
PaymentPayPal, Credit Card includes Visa, Master, American Express, Bank transfer.
Reviews
ELECBEE
All reviews come from verified purchasers
5
0%
4
0%
3
0%
2
0%
1
0%
In-Stock:9992
Qty.
1
Unit Price
€ 13.31€ 15.66
Ext. Price
€ 13.31€ 15.66
€ 13.31€ 15.66
Can Ship in 1-3 Business Days