Search for products...
Login
$USD
00
Elecbee CH9121 STM32 Serial Port RS232 to Ethernet Network Converter Module TTL Transmission Module Industrial Microcontroller Geekcreit for Arduino - products that work with official Arduino boards
SKU: 1441584
Favorites
Key Features
xa0
- Support 5V or 3.3V power supply, choose one;
- Serial TTL level, pin IO compatible with 3.3V and 5V voltage;
- Serial port baud rate supports 300 ~ 921600bps;
- The serial port supports full-duplex and half-duplex serial communication, and supports RS485 transceiver automatic switching;
- Two-way transparent transmission of serial data and network data;
- Support MDI/MDIX polarity automatic conversion, cross-connect or directly connect the network cable to any connection, the module automatically switches;
- Support DHCP to automatically obtain IP address and support DNS domain name access;
- Support KEEPALIVE mechanism;
- Support virtual serial port software, virtualize the network port into a computer COM port;
- Working mode supports TCP CLIENT, TCP SERVER, UDP CLIENT and UDP SERVER 4 modes;
- Supports 10/100M, full-duplex/half-duplex adaptive Ethernet interface, compatible with 802.3 protocol;
Set the serial port and network parameters of the chip through software and serial commands, and save the parameters after power off;
- Search and query all devices in the LAN through the UDP broadcast protocol to facilitate unified management of devices;
xa0
Speciications:
xa0
Ethernet Parameters:
Number of ports: 1
Interface standard: RJ45 interface
LAN Ethernet: 10 / 100Mbps
Data cache: 6K bytes
Protection: 2KV electromagnetic isolation
Network protocols: IP, ARP, TCP, UDP, ICMP, IGMP, DCHP and so on
xa0
Serial Port Parameters:
Number of ports: 1
Interface standard: TTL serial port, 2.54MM pin, 3.3V or 5V level
Baud rate: 300 ~ 921600bps
Data bits: 5,6,7,8,9
Stop bit: 1,2 bit
Parity: no parity, odd parity, even parity
Flow Control: None
Cache: 2K bytes
xa0
Supporting Software:
Parameter configuration: network configuration software, serial AT command
Module testing: test software (network, serial one)
xa0
Basic Parameters:
Size 43mmx23mmx14.5mm (length x width x height)
Working voltage DC3.3V / 5V
Operating current 200mA @ 5V
Power consumption ≤ 1W
Operating temperature -40 ~ 85 ° C
Storage temperature -55 ~ 125 ° C
xa0
Pin Description:
1. RESET: Factory reset pin, the module power-on detection, active low
2. DIR: RS485 receive, send switch control pin
3. TCPCS: TCP client mode, the port connection status indicator pin, the connection is successful output low
4. RUN: module running status indication pin, input 2Hz square wave
5. GND: Power Ground Pin
6. 3.3V: 3.3V DC power input pin, greater than 200mA, and 5V DC power supply optional
7. GND: Power Ground Pin
8. 5V: 5V DC power input pin, greater than 200mA, and 3.3V DC power supply can choose one of two
9. RSTI: reset pin, the internal pull-up, low-effective, can not be vacant
10. CFG: serial port configuration module enable pin, built-in pull-up, low-effective, do not have to be vacant
11. RXD: Serial data receive pin, serial port TTL level, compatible with 3.3V and 5V
12. TXD: serial data transmission pin, serial TTL level, compatible with 3.3V and 5V
13. GND: Power Ground Pin
14. 3.3V: 3.3V DC power input pin, greater than 200mA, and 5V DC power supply optional
15. GND: Power Ground Pin
16. 5V: 5V DC power input pin, greater than 200mA, with the optional 3.3V DC power supply can be.
xa0
Show More
Description
Overview:
RS232 to Ethernet, 5~18V power supply, one-button setting parameters, AT means to modify the module parameters in real time, automatically obtain IP, one button to restore factory settings. The module is a universal serial-to-Ethernet transparent transmission device, which can be connected to MCUs such as 51, AVR, PIC, ARM, etc. or other serial port (TTL) devices.
1 x CH9121 Serial Port RS232 to Ethernet Network Module
Shopping Guide
Shipping | Delivery Period | Elecbee ships orders once a day at about 5pm except Sunday. Once shipped, estimated delivery time depends on the below carriers you chose. Express: 3-7 days. Standard Post: 7-20 days. | |
| Shipping Rates | Shipping rates for your order can be found in the shopping cart. | ||
| Shipping Options | We offer express and standard delivery services. | ||
| Shipping Tracking | We will notify you by email with tracking number once order is shipped. You can track your order using the “Track My Order” feature. | ||
| Returning/Warranty | Returning | Returns are normally accepted when completed within 30 days from date of shipment, please contact customer service for a return authorization. Parts should be unused and in original packaging. Customer has to take charge for the shipping | |
| Warranty | All Elecbee purchases come with a 30-day money-back return policy, plus 1-year Elecbee warranty against any manufacturing defects. | ||
| This warranty shall not apply to any item where defects have been caused by improper customer assembly failure by customer to follow instructions, product modification, negligent or improper operation | |||
| Ordering | How to Buy | Elecbee accepts online orders. | |
| Add to cart > Check out > Submit order > Complete payment > Delivery | |||
| Payment | PayPal, Credit Card includes Visa, Master, American Express, Bank transfer. | ||
Reviews
ELECBEE
All reviews come from verified purchasers
5
0%
4
0%
3
0%
2
0%
1
0%
In-Stock
Qty.
1
Unit Price
$ 14.45
Ext. Price
$ 14.45
$ 14.45
Qty.
Unit Price
Ext. Price
10+
$13.73
$ 137.30
20+
$13.00
$ 260.00
100+
$11.56
$ 1156.00