Elecbee -5615 TLC5615 10-BIT Serial Interface Digital-to-analog Converter

Introduction:

The TLC5615 has a serial-connected digital-to-analog converter. Its output is a voltage type, and the maximum output voltage is twice the reference voltage value. With power-on reset function, that is, reset the DAC register to all zeros. The performance is better than the DAC of the early current type output.

The serial input of 10-bit data can be completed through only three serial buses. It is easy to interface with industry standard microprocessors or microcontrollers (microcontrollers). It is suitable for battery-powered test instruments and mobile phones. For digital offset and gain adjustment and industrial control occasions.

Parameters:

Power supply: 5V

Connection: 3-wire serial connection

Voltage output range: 2 times the reference input voltage

Low power consumption: maximum 1.75mw

Update rate: 1.21MHz

Settling time to 0.5LSB: typical value is 12.5LBs

Working temperature: 0 ℃ ~ 70 ℃

Pin compatible with Maxim MAX515

Pin Description:

vcc: positive power supply

GND: negative power supply

AOUT: DAC analog voltage output

REF: Reference input

DIN: serial data input

SCLK: serial clock input

CS: Chip select, active low

DOUT: serial data output

Functional block diagram:

Schematic diagram:

1 x Digital-to-analog converter