Elecbee 2.4G DL-LN33 Wireless Networking Board UART Serial Port Module CC2530

Name: Elecbee 2.4G DL-LN33 Wireless Networking Board UART Serial Port Module CC2530
Brand: Elecbee
SKU: EB0042415
Price: 9.98 EUR
Availability: InStock

SKU: EB0042415

Favorites

Key Features

Num.	Parameter	Parameter value
1	Product number	DL-LN33
2	Chip selection	CC2530
3	Working frequency	2400~2450MHz (16 channels total)
4	Communication Interface	UART serial port (supports 13 baud rates, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400, 125000, 250000, 500000)
5	Self-organizing network hops	<=15 jump
6	Single hop transmission distance	70 meters (out of the air, no occlusion test)
7	Number of points that can be accommodated	The typical value is 190. When the network tends to be dense, the number of nodes decreases, and the minimum value is 96.
8	MAX packet length	63Byte (including port address information)
9	Transmission capacity	The transmission rate is higher when only one node sends data: Because the routing information of the transmitted packet occupies a certain bandwidth, the longer the length of each packet, the higher the transmission efficiency. 2400 Bit/s when each package contains 3 bytes of data. 10KBit/s when each package contains 30 bytes of data.
13	MAX send rate	250KBit/s
14	Packet retransmission times	Up to 15 times, at least 5 times when the network load is high
15	Air delay	Single-hop between nodes, less than 10mS
16	Transmit power	4. 5dBm
17	Operating Voltage	2. 5V~3. 6V
18	Working current	Less than 30mA
19	Antenna interface	PCB antenna

Pin Descriptions:

Pin name	Pin position	Significance
NoUsed	1, 2,10,11,13	Not used, please keep it empty (empty refers to not connected to any circuit)
TestMode	3	Test mode, when working in normal mode in empty, grounding works in test mode. Please use it empty when the user is using it.
TestTx	4	Enter test information in test mode, which will be output as a controllable IO port when the user uses it.
TestRx	5	Enter test information in test mode, which will be output as a controllable IO port when the user uses it.
Gnd	6, 9,16	Ground
Vcc	7,8	Power supply
BaudReset	12	If this pin is grounded first and then the module is started, the module will force a 115200 default baud rate to operate. In this mode, the baud rate of the module can be read or set. The baud rate read is the baud rate previously set by the module, not 115200. If the baud rate setting is not performed, the module will be restarted again. Work with the previously set baud rate.
Tx	14	Uart output of the module
Rx	15	Uart input of the module

Num.	Parameter	Parameter value
1	Product number	DL-LN33
2	Chip selection	CC2530
3	Working frequency	2400~2450MHz (16 channels total)
4	Communication Interface	UART serial port (supports 13 baud rates, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400, 125000, 250000, 500000)
5	Self-organizing network hops	<=15 jump
6	Single hop transmission distance	70 meters (out of the air, no occlusion test)
7	Number of points that can be accommodated	The typical value is 190. When the network tends to be dense, the number of nodes decreases, and the minimum value is 96.
8	MAX packet length	63Byte (including port address information)
9	Transmission capacity	The transmission rate is higher when only one node sends data: Because the routing information of the transmitted packet occupies a certain bandwidth, the longer the length of each packet, the higher the transmission efficiency. 2400 Bit/s when each package contains 3 bytes of data. 10KBit/s when each package contains 30 bytes of data.
13	MAX send rate	250KBit/s
14	Packet retransmission times	Up to 15 times, at least 5 times when the network load is high
15	Air delay	Single-hop between nodes, less than 10mS
16	Transmit power	4. 5dBm
17	Operating Voltage	2. 5V~3. 6V
18	Working current	Less than 30mA
19	Antenna interface	PCB antenna

Pin Descriptions:

Pin name	Pin position	Significance
NoUsed	1, 2,10,11,13	Not used, please keep it empty (empty refers to not connected to any circuit)
TestMode	3	Test mode, when working in normal mode in empty, grounding works in test mode. Please use it empty when the user is using it.
TestTx	4	Enter test information in test mode, which will be output as a controllable IO port when the user uses it.
TestRx	5	Enter test information in test mode, which will be output as a controllable IO port when the user uses it.
Gnd	6, 9,16	Ground
Vcc	7,8	Power supply
BaudReset	12	If this pin is grounded first and then the module is started, the module will force a 115200 default baud rate to operate. In this mode, the baud rate of the module can be read or set. The baud rate read is the baud rate previously set by the module, not 115200. If the baud rate setting is not performed, the module will be restarted again. Work with the previously set baud rate.
Tx	14	Uart output of the module
Rx	15	Uart input of the module

Show Less

Description

1 x Wireless Networking Board

24G-DL-LN33-Wireless-Networking-Board-UART-Serial-Port-Module-CC2530-1549807

Shopping Guide

Shipping	Delivery Period	For in-stock parts, orders are estimated to ship out in 3 days. Elecbee ships orders once a day at about 5pm except Sunday. Once shipped, estimated delivery time depends on the below carriers you chose. DHL Express: 3-7 business days DHLeCommerce: 12-22 business days FedEx International Priority: 3-7 business days EMS: 10-15 business days Registered Air Mail: 15-30 business days
	Shipping Rates	Shipping rates for your order can be found in the shopping cart.
	Shipping Options	Shipping rates for your order can be found in the shopping cart.
	Shipping Tracking	We will notify you by email with tracking number once order is shipped. You can track your order using the “Track My Order” feature.
Returning/Warranty	Returning	Returns are normally accepted when completed within 30 days from date of shipment, please contact customer service for a return authorization. Parts should be unused and in original packaging. Customer has to take charge for the shipping
	Warranty	All Elecbee purchases come with a 30-day money-back return policy, plus 1-year Elecbee warranty against any manufacturing defects.
		This warranty shall not apply to any item where defects have been caused by improper customer assembly failure by customer to follow instructions, product modification, negligent or improper operation
Ordering	How to Buy	Elecbee accepts online orders.
		Add to cart > Check out > Submit order > Complete payment > Delivery
	Payment	PayPal, Credit Card includes Visa, Master, American Express, Bank transfer.

Reviews

ELECBEE

All reviews come from verified purchasers

In-Stock:9994

Qty.

Unit Price

€ 9.98€ 11.74

Ext. Price

€ 9.98€ 11.74

Can Ship in 1-3 Business Days