Elecbee 1200W/1800W 30A High Current DC-DC DC Constant Voltage Constant Current Boost Power Supply Module Electric Vehicle Booster 1200W

Name: Elecbee 1200W/1800W 30A High Current DC-DC DC Constant Voltage Constant Current Boost Power Supply Module Electric Vehicle Booster 1200W
Brand: Elecbee
SKU: EB0043663-1200W
Price: 28.30 EUR
Availability: InStock

SKU: EB0043663-1200W

Favorites

Key Features

1. The heat sink has a very good heat dissipation effect and a larger output power (the power can be up to 1800W when the 48V input is added to the fan).

2. The temperature-controlled fan, combined with the hydraulic bearing fan, achieves a very good balance between noise and heat dissipation. When the load is light, the fan does not rotate, and the fan automatically turns on after the load weight reaches 60 degrees. Can effectively reduce noise and extend life.

3. The main power tube insulation board is made of alumina, and the thermal conductivity is 10 times that of the insulation mat.

4. The 100V 210A TO-247 large package power tube has large power margin and good dynamic response.

5. Double large size iron-silicon-aluminum magnetic ring, using four 1.2 pure copper enamel enveloping lines, low heat and high efficiency.

6. The new design has a conversion efficiency of up to 98.1% (see the data sheet efficiency conversion curve below for details).

7. The brand 3296W multi-turn potentiometer has high adjustment precision and small drift.

8. The output current of the constant copper wire is sampled, and the constant current is stable and the temperature is small.

9. The undervoltage protection is adjustable, which can effectively protect various batteries and can also be used for solar cells.

10. With constant current function, it can be used for battery car boost, battery charging and so on.

11. Input three 20A fuses in parallel to protect against the risk of an unexpected short circuit on the output.

12. Three indicators: undervoltage, overcurrent, power indication, and working status at a glance.

13. Both input and output use high frequency capacitors, low output ripple, low heat generation and long life.

14. The input and output have newly added MLCC ceramic capacitors, and the output ripple is significantly reduced. It is about 100 millivolts at 48V to 72V 4A.

15.xa0Appearance size: 130 (length) * 51 (width) * 80 (high copper column) mm, 4 3 * 50MM long fixed copper column
xa0

Default delivery: The output voltage is about 60V, the current is about 10A, and the undervoltage protection is about 10.5V.

Application:

xa0

QS-4884CCCV-1800W is designed for lead-acid batteries, lithium batteries, solar cells or power supply boosting for electric vehicle boost and battery charging. It is very powerful.

xa0

1. For example, the original battery of the electric vehicle is 48V, which can be boosted to 60V to supply electric vehicles, which can improve the speed and acceleration of the electric vehicle.

2. Charge your electric bicycle. (1: For example, if you have a 12V or 24 idle battery in your hand, you can charge the original battery after boosting this boost power supply, which is equivalent to charging a battery for an electric car. 2: Simultaneous input It can also be connected to solar cells, wind power, generators and other power boosts to charge the primary battery to increase the battery life.)

3. The battery voltage can be increased to make the electric car run faster, and the built-in instrument should not exceed 10V.

4. Solar panel boost regulator.

xa0

Pin mode:

xa0

IN+ input positive, IN- input negative, OUT+ output positive, OUT-output negative

CV voltage regulation, CC current regulation, UVP input undervoltage protection regulation