X750 Shield 18650 UPS HAT & Safe Power Management Expansion Board for Raspberry Pi 4 Model B/3B+/3B/2B
· Provides continuous operations for up to 10~30hours (depending on battery type and qty used)
· Max 5.1V 8000mA Power Backup for even the most demanding RPi set ups
· Four 18650 Cells Lithium Ion Holder, can work with only two or three or four 18650 Lithium Ion batteries
· Can work with X750-A2 4-cell battery holder to increase battery capacity up to 38400mAh (12 18650 batteries)
· Supports 2A via micro-USB socket or 3A via DC jack fast charging
· Integrated battery protection circuit
· Integrated over current protection and over voltage protection
· Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c) - Cabling required
· Integrated 10-A fully-integrated synchronous boost converter
· Intelligent automatic charging and discharging
· On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
· On-board blue LED show the status of power on/off
Press the button to turn on
Press the button and hold for 1~2seconds to reboot
Press the button and hold for 3~7seconds to implement safe shutdown
Press the button and hold for >8seconds to force shutdown
· Supports safe shutdown and full poweroff through software
· On-board blue LED shows the status of power on, reboot and shutdown
· On-board pin header to select auto power-on when power supplied or battery installed
· Ultra-low standby power consumption of μA to maximize battery life
· Operate in both charge mode and boost mode to allow full system management and battery power management
· Advanced system power path management avoids frequent charging and extend battery life
· Advanced system power path management allows 3A fast charging and powering Raspberry Pi at the same time
· Powers the Raspberry Pi via the 40-pin header - no additional cabling required
· On-board DC power jack (5.5*2.5mm) and XH2.54 connector convenient for power input
· On-board PH2.0 connector allows to connect external power switch and DIY your perfect case
· On-board XH2.54 power output connectors allow to power other devices
· Mounting holes and standoffs provide mechanical stability of the Raspberry Pi and X750 assembly
· Ideal solution to increase battery capacity (total battery capacity up to 38400mAh, 12 18650 batteries)
· Integrated battery protection circuit
· Mounting holes and standoffs provide mechanical stability of the Raspberry Pi, X750 and X750-A2 assembly
· Via DC power jack: 4.7~5.5Vdc ±5%, ≥4A
· UPS output : 5.1V ±5% Max 8A
· UPS charging current: 2A via Micro-USB socket, 3A via DC jack
· Terminal Battery Voltage : 4.2V
· Recharge Threshold : 4.1V
· Do not apply power to your Raspberry Pi via the Micro USB socket or Type-C socket.
· Do not use 18650 battery with built-in protection circuit
Click for more info.
Contact Sales
Your Name* | |
Your Email* | |
Topic* | |
Qty | |
Message | |
SUBMIT |
- Description
The X750 is a multi-functional expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides intelligent and safe power management, safe shutdown, full power off through software and an advanced uninterruptible power supply.
The X750 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications, and it's the high-end product of the Geekworm UPS family.
Item | Description | |
FOR USE WITH | Raspberry Pi 4 Model B/3B+/3B/2B/A+/B+ | |
OPERATING SYSTEM | · Raspbian Stretch · Safe shutdown function tested for Raspbian, other operating systems to be tested and advised | |
1 x X750 Expansion Board
1 x GPIO and power daughterboard
1 x 8-pin connection cable
8 x Screw M2.5*5 mm
2 x Spacer M/F M2.5*22+6 mm
2 x Spacer F/F M2.5*22mm
- Reviews (29)
- All(29)
- Q & A
-
: Where is the origin of Elecbee products? Are they certificated?2023-03-03
-
Answer:
Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.
2023-03-03
-
: What forms of payment do you accept?2023-03-03
-
Answer:
Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.
2023-03-03
-
: When will you arrange shipment?2023-03-03
-
Answer:
After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.
2023-03-03
-
: How to exchange or return?2023-03-03
-
Answer:
1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.
2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;
3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.
2023-03-03
Related Products
MMDVM HS Dual Hat Duplex Hotspot + Raspberry Pi Zero W + 3.2 LCD Screen+ 16G SD Card + Aluminum Case Assembled Kit
..
Micro USB Charger EU Plug 5V 2.5A Adapter For Raspberry Pi 3
1 x Charger ..
MMDVM Hotspot Support P25 DMR YSF + Raspberry Pi Zero Board + OLED Display + 8G TFT Card + Antenna + Acrylic Case Kit
Product Description:Jumbo-SPOT-RTQ is a completely self-contained digital hotspot supporting DMR,Dst..
10PCS Black Cover Case Shell For Raspberry Pi Model B+
10x Black Cover ,,,,..