Elecbee MAX262 Programmable Filter Bandpass Band-Resistant All-Pass Low-Pass High-Pass Universal Filter 140KHz

SKU: EB0041635

Favorites

Key Features

xa0

1. Power: ±5V typical power supply

2. Input and output two SMA interfaces INA, INB, VOUTA, VOUTB, output A and B can be cascaded by jumper P1 to realize fourth-order or other form of filter

xa0

Specifications

Show Similar Products >

Attribute

Value

Wireless Capability

Bluetooth + Cellular

Model

MAX262

Show Similar Products >

Description

Overview:

The LP/HP/BP/NO filter can be built using the principle of switched capacitor filtering.

The internal contains two identical filtering units A/B, each unit is two-section filtering, so a MAX262 can form a fourth-order filter.

Four parameters are used when using: center frequency f0, Q value, clock frequency, working mode. The type of filter (LP/HP/BP/NOTCH) is determined by the pin connection. The cutoff frequency f0 of the filter is determined by fclk and the parameter FN. The Q value of the filter is determined by the parameter QN.

The parameter measurement can be more accurate, but because it is switched capacitor filtering, so the output waveform is stepped. The common method is to add a RC low-pass filter to remove the high-frequency clock signal.

Detailed Description:

1. Four modes

Mode 1: Band pass, low pass. Applicable types Butterworth, Chebyshev, Bessel. Can also be used for band stop filters.

Mode 2: All-pole band pass, low pass

Mode 3: Elliptical Bandpass, Elliptical Lowpass, Qualcomm

Mode 4: All Pass

2. Fclk is input through pin CLKA/CLKB, which can change the cutoff frequency of the filter together with the parameter FN.

3. The FN value is a decimal representation of the binary value for F0,Q.

The center frequency range is 1HZ-100KHZ, and the MAX262 center frequency can be up to 140KHZ.

Calculation method of center frequency or inflection point frequency:

Mode 1, 3, 4: Fclk / f0 = (26 + N) pi / 2; converted f0 = fclk * 2 / pi / (26 + N)

Mode 2: N= fclk/f0/1.11072-26·

4. QN values ??range from 0.5-64.0, maximum mode up to 90

Q value control word calculation method:

Mode 1, 3, 4: N = 128-64/Q

Mode 2: N=128-90.51/Q

5. The working mode, FN, and QN can be stored in the MAX262 internal ROM by writing the address lines, data lines, and control lines of the MAX262, thereby making the system work.

Select A0-A3, the data in the ROM will be updated, and D0/D1 for the data bits. Data is written on the rising edge of the WR signal. The electrical signal at the Fclk input does not interfere with the digital signal.

Detail:

1. Adding a latch/trigger to the when connected to the MAX262 can significantly reduce interference.

2. There are two ways to set the frequency f0:

Method 1: fclk is fixed and the value of FN is changed. Since the FN range is only [0-63], the step value is small and the accuracy is low.

Method 2: FN is fixed and fclk is changed. Adjusting fclk gives a satisfactory cutoff frequency.

1 x MAX262 Programmable Filter

MAX262-Programmable-Filter-Bandpass-Band-Resistant-All-Pass-Low-Pass-High-Pass-Universal-Filter-140K-1382154

Shopping Guide

Shipping	Delivery Period	For in-stock parts, orders are estimated to ship out in 3 days. Elecbee ships orders once a day at about 5pm except Sunday. Once shipped, estimated delivery time depends on the below carriers you chose. DHL Express: 3-7 business days DHLeCommerce: 12-22 business days FedEx International Priority: 3-7 business days EMS: 10-15 business days Registered Air Mail: 15-30 business days
	Shipping Rates	Shipping rates for your order can be found in the shopping cart.
	Shipping Options	Shipping rates for your order can be found in the shopping cart.
	Shipping Tracking	We will notify you by email with tracking number once order is shipped. You can track your order using the “Track My Order” feature.
Returning/Warranty	Returning	Returns are normally accepted when completed within 30 days from date of shipment, please contact customer service for a return authorization. Parts should be unused and in original packaging. Customer has to take charge for the shipping
	Warranty	All Elecbee purchases come with a 30-day money-back return policy, plus 1-year Elecbee warranty against any manufacturing defects.
		This warranty shall not apply to any item where defects have been caused by improper customer assembly failure by customer to follow instructions, product modification, negligent or improper operation
Ordering	How to Buy	Elecbee accepts online orders.
		Add to cart > Check out > Submit order > Complete payment > Delivery
	Payment	PayPal, Credit Card includes Visa, Master, American Express, Bank transfer.