Elecbee DIY Power Bank 18650 Bttery Case Diy QC3.0 Power Bank 5V DIY Battery Fast Charger Shell Quick Charge PD2.0 3.0 18W

- Any one port supports fast charge,When two or more outlets are used simultaneously, only 5V is supported

- Integrated QC2.0/QC3.0 Qualcom output fast charge protocol;

- Integrated FCP Hua wei, SFCP Spreadtrum,xa0 input/output fast charge protocol;

- Integrated MTK PE+ 1.1&2.0 output fast charging protocol;

- USB C/ pd2.0/pd3.0 input and output protocol, USB C/PD3.0 PPS output protocol, Compatible with BC1.2, phone Samsun mobile phone

- Supports 5V voltage tap input/output

PPS support 5~11V

- Adaptive charging current regulation

- Synchronous switch discharge efficiency of 5V 2A reaches 92%xa0

- WithLighting function

1. Please usexa0 flat-headed 18650 DIY ,If use the old battery,pls test the voltage,More than 3.5v and the Internal resistance less than 60 ,can't use the flashlight 18650 battery

2. Do not connect the positive and negative terminals backwards, otherwise it will burn the circuit board

3. Don't close the cover until the test is finished

4. After put in battery must charging for this power bank activation , if not won't have the output

1 x DIY Power Bank 18650 Bttery Casexa0

(Package Not include Battery!!! only case and pcb)