Elecbee JK11-5V 100S/15min/30min Delay Adjustable Infinite Loop Single-time Multi-function Relay Module Delay Circuit Module

Name: Elecbee JK11-5V 100S/15min/30min Delay Adjustable Infinite Loop Single-time Multi-function Relay Module Delay Circuit Module
Brand: Elecbee
SKU: EB0047020
Price: 5.94 USD
Availability: InStock

SKU: EB0047020

Favorites

Key Features

xa0

- Using industrial-grade single-chip microcomputer to control time, high precision and stable performance;

- Two adjustable resistors are used to adjust the time, and the connection duration and the disconnection time can be independently adjusted;

- The external contact is activated, and the timing is started by shorting the self-reset button. It is also possible to start the countdown by shorting the triggers together to achieve power-on;

- The time range is divided into 0-100 seconds, 0-15 minutes, and 0-30 minutes.

xa0

Basic working principle:

xa0

Taking the factory standard setting as an example, the red LED will light when the power is turned on, and the relay is in the off state. When shorted at the trigger end, the module green light is on and immediately enters the working state. Triggering again in the working state will stop working.

In the working state, the relay will pass T1 seconds, break T2 seconds, pass T1 seconds, break T2 seconds... infinite loop. T1 T2 is the length of time the user adjusts with an adjustable resistor.

xa0

Instructions:

xa0

- Power access:

The module is connected to the power supply according to the correct power supply voltage and polarity. The red line of the power supply terminal is positive and the black line is negative.

- Trigger line access:

The two white lines of the trigger end are connected to a switch, and the module can be started by tapping the switch, and then the switch is stopped by tapping the switch. The trigger switch can be a tact switch, a micro switch, an optocoupler C-E terminal, a relay contact, and the like.

- Normal speed and quick mode settings:

The OP1 jumper is used to select normal speed and fast mode, and the shipment defaults to normal speed.

- Loop mode and single mode settings:

The OP2 jumper is used to select the loop mode and the single mode, and the shipment defaults to the loop mode.

Cycle mode: After starting, the relay is on-off-on-off-disconnect..., and it is cycled according to the set duration;

Single trigger: After starting, the relay is turned on, and the relay is turned off after T1 duration. (After disconnection, the action ends and waits for trigger again)

xa0

Precautions:
xa0

1. The module power supply is not protected against reverse protection, because it is important to remember that the power supply cannot be connected.

2. The trigger terminal can only be connected to the passive switch, not to the voltage signal. Doing so can damage the module.

3. When the resistance load is connected, no special treatment is needed; when the capacitive load is connected, the relay module is easily damaged by electricity. It is recommended to use the AC contactor derated or the contact current of the motor should be considered within 10A.
4.Borad Number: (marker adjustable delay time)

1=15min

2=100S

3=30min

xa0

- Using industrial-grade single-chip microcomputer to control time, high precision and stable performance;

- Two adjustable resistors are used to adjust the time, and the connection duration and the disconnection time can be independently adjusted;

- The external contact is activated, and the timing is started by shorting the self-reset button. It is also possible to start the countdown by shorting the triggers together to achieve power-on;

- The time range is divided into 0-100 seconds, 0-15 minutes, and 0-30 minutes.

xa0

Basic working principle:

xa0

In the working state, the relay will pass T1 seconds, break T2 seconds, pass T1 seconds, break T2 seconds... infinite loop. T1 T2 is the length of time the user adjusts with an adjustable resistor.

xa0

Instructions:

xa0

- Power access:

The module is connected to the power supply according to the correct power supply voltage and polarity. The red line of the power supply terminal is positive and the black line is negative.

- Trigger line access:

- Normal speed and quick mode settings:

The OP1 jumper is used to select normal speed and fast mode, and the shipment defaults to normal speed.

- Loop mode and single mode settings:

The OP2 jumper is used to select the loop mode and the single mode, and the shipment defaults to the loop mode.

Cycle mode: After starting, the relay is on-off-on-off-disconnect..., and it is cycled according to the set duration;

Single trigger: After starting, the relay is turned on, and the relay is turned off after T1 duration. (After disconnection, the action ends and waits for trigger again)

xa0

Precautions:
xa0

1. The module power supply is not protected against reverse protection, because it is important to remember that the power supply cannot be connected.

2. The trigger terminal can only be connected to the passive switch, not to the voltage signal. Doing so can damage the module.

1=15min

2=100S

3=30min

xa0

Show Less

Description

>>>Manual: Click here to open<<<

Specifications:

Voltage: 5V DC

Quiescent current: 8mA

Operating current: 95mA

Trigger: passive switch trigger, response time is 0.03 seconds (the trigger terminal can not access the active signal)

Minimum on-off time: 0.2 seconds

Load capacity: 10A

Output form: normally open + normally closed

Size: 70*20*19mm

1 x JK11-5V 100S/15min/30min Delay Adjustable Multi-function Relay Module

JK11-5V-100S15min30min-Delay-Adjustable-Infinite-Loop-Single-time-Multi-function-Relay-Module-Delay--1592696

Shopping Guide

Shipping	Delivery Period	For in-stock parts, orders are estimated to ship out in 3 days. Elecbee ships orders once a day at about 5pm except Sunday. Once shipped, estimated delivery time depends on the below carriers you chose. DHL Express: 3-7 business days DHLeCommerce: 12-22 business days FedEx International Priority: 3-7 business days EMS: 10-15 business days Registered Air Mail: 15-30 business days
	Shipping Rates	Shipping rates for your order can be found in the shopping cart.
	Shipping Options	Shipping rates for your order can be found in the shopping cart.
	Shipping Tracking	We will notify you by email with tracking number once order is shipped. You can track your order using the “Track My Order” feature.
Returning/Warranty	Returning	Returns are normally accepted when completed within 30 days from date of shipment, please contact customer service for a return authorization. Parts should be unused and in original packaging. Customer has to take charge for the shipping
	Warranty	All Elecbee purchases come with a 30-day money-back return policy, plus 1-year Elecbee warranty against any manufacturing defects.
		This warranty shall not apply to any item where defects have been caused by improper customer assembly failure by customer to follow instructions, product modification, negligent or improper operation
Ordering	How to Buy	Elecbee accepts online orders.
		Add to cart > Check out > Submit order > Complete payment > Delivery
	Payment	PayPal, Credit Card includes Visa, Master, American Express, Bank transfer.

Reviews

ELECBEE

All reviews come from verified purchasers

In-Stock:9998

Qty.

Unit Price

$ 5.94$ 6.99

Ext. Price

$ 5.94$ 6.99

Can Ship in 1-3 Business Days