Elecbee DR55B01 DC 5-24V 2A Flip-Flop Latch Motor Reversible Controller Self-locking Bistable Reverse Polarity Relay Module

1. This is a self-locking (bistable) reverse polarity relay. Trigger once, output reverse polarity (and hold), trigger again, output = input (and hold).

2. Self-locking (bistable) reverse polarity controller, the module can just control forward and reverse (start and stop are controlled by power on and power off).

3. With power indicator and reverse polarity indicator.

4. Low pulse control mode, more convenient to use.

5. Made of high-quality electronic components, stable and reliable performance

Item Type: CW/CCW Controller Module

Optional Input voltage: DC 5V (5V version), DC 6-24V (12V version)

Module working current: forward 2MA, reverse 35-40MA

Load voltage: equal to output voltage

Load current: maximum. 2A (motor <= 1A)

With power indicator and reverse polarity indicator

Control mode: low pulse control

Size: Approx. 43 x 21 x 16mm / 1.7 x 0.8 x 0.6in

Weight: 13.5 g / 0.5 oz(approx.)

I +: power input +;

I-: voltage input-;

O +: power output + (The output in reverse polarity is-);

O-: power output-(The output in reverse polarity is +);

G: trigger signal ground;

T: trigger signal input (0.2-2 seconds low pulse).

Power-on, the output=input, press the trigger button, Reverse polarity output, press again,xa0 the output=input, the third press, Reverse polarity output, and so on.

Turn off the power and stop output

1. For the module to work stably, be sure to use a power supply that is twice the load power. If the load is a motor, use a power source with more than 3 times the power.

2. The maximum load current is 2A. If it is a load motor, the maximum load current is 1A.

3. The module can only control forward and reverse (start and stop are controlled by power on and power off)