Elecbee 5MP OV5647 Camera Module 72° Focal Adjustable Length Night Vision NoIR Camera Board with Automatic IR-CUT

The Raspberry Pi IR-CUT Camera is the day and night camera.You can get the best imaging whatever it is in the daytime or at night.It's a built-in IR-CUT camera, can be used during the day and night. When the camera at daytime will switch to day mode, the camera image is a normal color image, when the camera at night will switch to night mode , the camera can normally identify the infrared fill light of the light, which can be set through the software switch, to solve the other night vision camera during the day to take pictures of the image color is not normal.

1. The automatic switch camera will automatically turn to day mode ( non-night vision ) at daytime or the light enough environment , and it will turn to night vision mode at dark environment .

2. The non-automatic switch camera is the day mode acquiescently . You can switch to night vision mode by this way.

1. Executive command "sudo nano /boot/config.txt"

2. Add"disable_camera_led=1"

3. Press"Ctrl+O" ( on the keyboard ) , and press "Enter" to save this configuration , then press "Ctrl + X " to exist .

4 . Restart the raspberry pi and it will turn to day mode.

5. Remove the "sudo nano /boot/config.txt" and save configuration ( as the 3 ) , restart the raspberry pi , it will be back to day mode

  

1. 5 megapixel OV5647 sensor

2. CCD size: 1 / 4inch

3. Aperture (F): 1.8

4. Focal Length: 3.6mm adjustable

5. Field of View: 72 degree

6. Sensor best resolution: 1080p

7. 4 screw holes to fix the IR lights or holder:

   1). Used for attachment

   2). Provides 3.3V power output

 

1 x Automatic IR-Cut Camera

2 x IR Lights

1 x 15 cm FFC

1 set x Screws and Nuts