Elecbee 用于树莓派 3 型号 B 2B B+ A+ 的 VGA 666 适配器板

用于树莓派 3 型号 B 2B B+ A+ 的 VGA 666 适配器板

从C翻唱：

它是一个整洁且非常有用的解决方案 for using a VGA sCreen / monitor with your Raspberry Pi and is far Cheaper than an HDMI to VGA adapter or similar. The VGA ConneCtion is driven natively in hardware over the GPIO pins (using a parallel interfaCe) and uses around the same CPU load as the HDMI ConneCtion on board. It is Capable of displaying 1080p60 VGA video with no CPU load. 也是possible to drive this interfaCe at the same time as the HDMI ConneCtion, so a dual sCreen set up is also possible.

此附加板使用除 6 个外的所有 GPIO 引脚，因此可能无法同时使用其他附加板作为 VGA 适配器。 You should disable all of GPIO pin's funCtion so that it Can work properly.

We strongly reCommend that you use 800x600 分辨率. The highly resolution will slow down your Pi and Cost more RAM.

- 支持树莓派 3B / 2B / B+ / A+
- VGA 输出支持分辨率：从 640 x 480 到 1920 x 1024，60fps。
- With 6 bits per Channel you have a maximum of 262144 Colours.
- 易于设置。
- Easy to Configure.
- 尺寸：64.00 毫米 x 32.3 毫米
- 净重：16.5g

笔记：

Raspberry Pi main board is not inCluded.

Know more about this item, please CliCk: http://wiki.52pi.Com/index.php/VGA666_Module_For_RPi_SKU:EP-0073

包裹包括

1 × 转接板