规格:
电压:100V-220V AC
能量消耗:<1.0W (standby zero power consumption)
输出:输出电压与输入电压相同,最大供电容量为10A。
尺寸:88*36*22mm
螺丝孔:中心距83mm*31mm,孔径3.2mm
时间范围:(4档,开关选择)
一档:范围0.2秒-30秒,精度:0.1秒
二档:范围0.2秒-300秒(5分钟),精度:0.3秒
三档:量程0.2秒-30分,精度:1.8秒
四档:范围0.2秒-300分钟(5小时),精度:18秒
接线端子:
L:火线接入
L2:开关输出侧火线,取自发热体
N:零线(公)
FAN:风扇输出,火线
指示:
注意:启动按钮需要能短时间承受负载电流(约0.3秒),也就是说如果你控制5A电流的风扇,启动按钮应该能短时间承受5A及以上 .
时间范围设置:
When the selector switch is placed in the 30 position, it means 0-30 adjustable
When the selector switch is placed at position 300, it indicates that 0-300 is adjustable.
时间价值调整:
可调电阻向数字方向逆时针旋转减少时间,顺时针向+方向增加时间
时间单位设置:
When the selector switch is placed in the Sec position, the unit is: second
When the selector switch is placed in the Min position, the unit is: minute
例子:
请求延迟 50 分钟:
1.范围放在300位置
2.时间单位置于Min位置。
3.将可调电阻调到50的位置,调到300,所以调到1/5就是50。
注:电位器调节也可以用万用表电压档快速调节。 比如量程是30,需要调到12,那么电压可以调到2。
t=Ut/5*30=2.0V / 5.0V * 30 =12
Ut是万用表测得的电压,30是选择开关选择的量程,也可以选到300。
套餐包括:
1 x RD21F 延迟继电器模块电源,用于延迟关闭风扇模块