Elecbee Omni Full Band Antenna 3G, 4G (3-4dB, 50 Ohm, Fiberglass, SureCall SC-288W)

Surecall Omni Antenna with bandwidth frequency coverage of 698-2700 MHz is a ceiling or wall mount Omnidirectional Antenna with 3dBi gain and N-female termination. Consider 3G, 4G, 5G version of this Omni antenna that covers sub-6 5G frequencies from 617 MHz.

With 100 watts of power, this full band omni-directional 50 ohm fiberglass antenna provides excellent signal boosting for cellular and wireless connectivity, providing 3 to 4 db Gain. This antenna includes a mounting kit, and can be set on walls or roofs. It is ideal for downtown settings, RVs, or marine installations, where signal strength is already reasonable at 3+ bars. It is included with many of our top of the line cell phone signal boosters.

The Omni-directional antenna gathers signal from all sides, and does not need to be pointed at a cellular tower. It is easy to install, and weather resistant. Connectivity begins here. Omni-Directional Antenna - Full Band Fiberglass Antenna (SureCall SC288W/ Cellphone-Mate CM288W). UPC: 896831002876. This wall or roof mount antenna is ideal for downtown urban settings, RV’s or marine installations.

From the manufacturer:

Summary.

• Outside use.
• Omni-directional.
• 3-4 dB Gain.
• 2G, 3G, 4G, WLAN.
• Full-band.
• Weather resistant.
• Easy to install.

Overview.

This wall or roof mount antenna is ideal for downtown urban settings, RVs or marine installations. It is built with a strong fiberglass casing and is designed to cover 2G/ 3G/ 4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies.

Cellphone-Mate CM288W or SureCall SC288W full band fiber-glass antenna is an omni-directional antenna that gathers signals from all sides and does not need to be pointed toward a cellular tower. Range of antenna is approximately 50 miles to, and from cellular towers (free of obstructions). Besides the antenna itself, parts includes mounting equipment for either a flat horizontal surface or a wall. It should be mounted in an upright position for best results. 

The CM288W is compatible with the following SureCall products:

Amplifier Compatibility: all 4G boosters series (CM700, CM2100, CM2500), RV boosters (CM2000-WL 45dB), Accelerator kit (CMAK-4G), all SOHO boosters series (CM2000-WL 62db, CM2000-W 55dB), all In-building amplifiers series (CM2020,FORCE 5).

Cable compatibility: LOW Coax Cables WITH Type N-MALE ON EITHER side (CM400, CM240 etc.). Fits Type 400 Cable with N-Male Connector.

Specifications.

Due to its full band capability, this antenna can gather signals from all carriers in USA and Canada including the following cellular service providers:

This SureCall CM288W/ SC288W fiberglass antenna is a omni-directional antenna designed to cover 360° for 2G/ 3G/ 4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies. It is a high gain indoor antenna suited for places where the signal needs to be broadcast over a central area or space. This vertical mount antenna transmits and receives signal to cell phones.

OUTSIDE ANTENNA INSTALLATION OF CM288W OMNI ANTENNA:

Sure Call CM-288W/ SC-288W full-band antenna is an omni-directional outside antenna designed to cover 360° for 2G/ 3G/ 4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies. SureCall CM 288 or SC 288 SKU is for a high gain outside antenna suited for places where the signal needs to be broadcast over a central area or space. This outside vertical mount antenna transmits and receives signal to cell phones up to 50 miles from a cell tower.

Installation Steps:

1. Unscrew antenna from L-mounting bracket on antenna base with hands, or wrench if needed.
2. Find corner of house with  strongest cell signal. To measure your existing cell signal on an Apple iOS mobile phones & tablets, dial *3001#12345#*and press Call. In the top-left corner, a number appears instead of bars. For Android devices, you can download several apps to measure exact signal strength. Look up check real signal strength to find a cell signal measurement app.
3. Using vertical plate of bracket, mark position of desired location.
4. Unscrew nut, lock washer, regular on end of stucco screws (2) and remove them.
5. Place vertical plate into desired location and tap the screws, head first, along with sleeve into ½” to ¾”stucco wall.
6. In this order, place washer, lock washer and nut on each screw and tighten until secure. When tightening screw, sleeve will expand to secure plate.
7. Screw antenna securely back onto horizontal plate.
8. Hand tighten cable to one end of antenna connector and the other end of cable to signal booster connector marked OUTSIDE.

Note: If desired surface for installation plate is wood or concrete, wood or masonry screws for L-plate will have to be purchased separately.