Features:
1. Graphics power supply using 4 330UF solid state capacitors, more secure, more efficient and more practical.
2. Transfer card 6PIN interface 12V to strengthen the DC-DC power supply, so that the graphics card from the motherboard independent of the board, which in the multi-graphics card to reduce the burden on the motherboard.
3. The use of the original slot card connector, graphics card and connector contact better.
4. PCI-E connector uses a multi-layer shielded wire, the longest can be connected to the 3M without signal attenuation.
5. USB cable is soft and stable, easy to track, graphics cards can be placed at will.
6. Slot equipped with fixed buckle, more convenient to remove the graphics card and fixed graphics card, graphics card will not fall off from the slot.
7. PCI-E connector with multi-layer shielded wire, the longest can connect 3 Meters the signal will not attenuate, to ensure signal integrity.
Specifications:
1. Power connector: 6 pin power cable
2. The board size: 12.7cmx4.2cm
3. USB cable length :60cm
4. Compatible Use: with any graphics cards
5. Capacitors: 330UFx4
Packaged Included:
1 x PCI-E 16X Adapter
1 x PCI-E 1X Riser Board
1 x 60CM USB3.0 Cable
1 x 6Pin Power Cable
Please Note:
1. This extension cable is for the motherboard PCI-E slot (1X, 2X, 4X, 8X, 16X). Please plug in the floppy drive power cord when using it.
The PCI-E extension cable must be broken when the computer and then plug the wire, the notes must be read when use!
2. The wire is customized, please do not just plugin at will!
3. When inserting the line the direction must be clear, do not plug or insert offset, to prevent burn equipment; plug the device first and then plug the line,
to avoid excessive force socket interrupted.
4. Dual-core graphics recommended using the old cable, the motherboard is 16X also recommended the old cable!
