zBoost 75 Ohm Wide-Band Directional Window-Mount Antenna | CANT-0043
Contact Sales
Your Name* | |
Your Email* | |
Topic* | |
Message | |
SUBMIT |
- Description
Product Description
Wideband Directional Window Mount Cell Phone Signal Antenna provides 6 dBi Gain on LTE & Cellular band frequencies and 7.5 dBi Gain on AWS & PCS band frequencies.
zBoost CANT0043 is a window-mounted high gain antenna supporting both 3G and 4G cellular communications on the CEL, PCS, AWS, and LTE frequency bands. It uses a type F-female connector and supports RG6 and RG11 coaxial cables. A wall/ mast mounting bracket is also included for applications where sufficient signal is not present at a window interior. This antenna provides increased signal coverage when aimed in the direction of best signal. It must be wall mounted with the cable pointing down. Avoid pointing the antenna within 2 feet of other wires or metal objects.
Purchase includes: Antenna, cable with F type connector, short and long suction cup attachments, as well as a wall/mast mounting bracket kit for flexible mounting options.
Wi-Ex zBoost external antenna provides increased coverage for all cellular bands (700 MHz - 2600 MHz) from a single direction.
Summary:
- Outdoor, window mount wide-band unidirectional antenna.
- Fixed easy installations.
- Weather resistant.
- Up to +7.5 dBi Gain.
zBoost CANT-0043 wide-band indoor/outdoor receiving signal antenna provides improved signal for devices operating in the cellular, PCS, AWS, and LTE frequency bands. For maximum performance, be sure to aim the antenna in the direction of your wireless provider’s cell tower. If you know the direction of your provider’s tower, simply point the antenna in that direction. If you are unsure of the location of the nearest tower, see antenna aiming instructions below. Note: The closest tower to your location may not be for your specific provider.
Installation tips:
FIRST: Place the signal antenna on the interior of a window located in the area of best signal.
Determine the location that provides the strongest signal using the signal strength indicator on your cell phone. Find the location on the window that provides the most bars of signal strength.
Note: Energy-efficient windows will likely block signal from reaching the signal antenna. In this case, it is necessary to move the signal antenna away from this window to another location.
Before proceeding, make sure that the intended surface is clean and clear of any dust. Then, using the suction cup attachments, fasten the signal antenna to your window making sure to point the correct face of the antenna to the tower as indicated on the label. In order to capture the strongest signal, you may do one or all of the following:
1. Move the antenna around the window – higher is usually better.
2. Use the long suction cup attachments as provided to better angle the antenna to capture the best signal. The antenna must be vertical on the window (as pictured in the illustration to the right, with cable at the bottom – not on the side). Avoid draping the coax near the antenna.
3. Keep the signal antenna at least 2 feet from any metal.
4. The signal antenna and indoor antenna should have at least 15 feet of horizontal separation. Increasing separation of the 2 antennas will optimize zBoost performance.
Flexible Mounting Options:
Mounting option 2: Mount the signal antenna to an interior or exterior wall by first placing the wall/mast bracket on the desired wall using screws and wall anchors (not provided). Unscrew and remove the endcaps from the top and bottom of the antenna and place the antenna inside the bracket so that the cable hangs down and then snap into place. Fasten the endcaps back into place.
Note: Avoid placing the signal antenna near metal such as wiring, a window edge frame, A/C unit, metal siding, etc.
Mounting option 3: Install a mast (not provided) on your roof in the area of best signal. Keep in mind, the antenna will need to face the direction of your carrier’s nearest tower. Fasten the wall/mast bracket to the mast using the provided hardware as seen above. Unscrew and remove the endcaps from the top and bottom of the antenna and place the antenna inside the bracket so that the cable hangs down and snap into place. Fasten the endcaps back into place.
SECOND: Connect coax cable to the antenna.
THIRD: Route the cable indoors and connect it to the base unit using the cell phone signal booster installation instructions.
zBoost Panel Window/Pole Mount Directional Antenna CANT-0043 Specifications:
Frequency: 704 - 894 MHz & 1710 - 2155 MHz.
Gain: 6 dBi Average & 7.5 dBi Average, Respectively.
Beamwidth: 76 Degrees & 54 Degrees, Respectively.
Connector: Type F female.
Impedance: 75 Ohms.
Dimensions: 6.0 x 6.5 x 1.8 inches.
The FCC requires that this panel antenna has a minimum horizontal separation of 6 feet (2 meters) from other CMRS (commercial mobile radio service) devices.
Complete Overview:
zBoost CANT-0043 wide band antenna is a window-mounted high gain antenna supporting both 3G and 4G cellular communications on the CEL, PCS, AWS, and LTE frequency bands. It is a window-mounted signal antenna with an F-female connector and supports RG-6 and RG-11 coaxial cable. A wall/mast mounting bracket is also included for applications where sufficient signal is not present at a window interior.
This antenna provides increased signal coverage when aimed in the direction of best signal. The included F to TNC adaptor connects the antenna to the base unit using 15 ft. of RG-6 coax cable (part # YX030-15W). This antenna must be wall mounted with the cable pointing down. Avoid pointing the antenna within 2 feet of other wires or metal objects. Includes: Antenna, cable with F type connector, short and long suction cup attachments, as well as, a wall/mast mounting bracket kit for flexible mounting options.
It fits 75 Ohm cables with F-Male connector such as Type RG-6 cable with F Male connectors or Type RG-11 cable with F Male connectors.
- Q & A
-
: Where is the origin of Elecbee products? Are they certificated?2023-03-03
-
Answer:
Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.
2023-03-03
-
: What forms of payment do you accept?2023-03-03
-
Answer:
Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.
2023-03-03
-
: When will you arrange shipment?2023-03-03
-
Answer:
After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.
2023-03-03
-
: How to exchange or return?2023-03-03
-
Answer:
1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.
2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;
3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.
2023-03-03
- Reviews (23)
- All(23)
Related Products
Shakespeare Galaxy 5239 World Band Cellular Antenna (9.25 inches)
Product DescriptionShakespeare Galaxy 5239 World-band antenna provides coverage for 2G, 3G, 4G and W..
Rubber Mat or Pad to Protect Roof from Non-Penetrating Antenna Mounts
Product Description A rubber mat for roof protection when used under non-penetrating roof mounts. Wh..
Yagi Antenna 700, 800, 900 MHz (50 Ohm, Up to +10.8 dB Gain)
Product Description Yagi Antenna (50 Ohm) | weBoost 301111 Wilson Electronics / WilsonPro.2G and 3G ..
Window Suction Cup Mount for Outside-Facing Panel Donor Antenna
Product Description This stick-on window suction cup mount for outside facing cell tower panel donor..